Hi, can any one tell me the fault area for the front led flashes of 7 on the right led then one on the left repeated. Also any hints!
the model is a KV-A2132U.
Thanks

[micks_address]

This from sony''s web site http://www.css.ap.sony.com/


Why does the TV standby indicator flashes when switching on the TV?

Applicable Models
KV-AR21 Series, KV-AR14 Series, KV-HW21 Series, KV-AR342 Series, KV-AR292 Series, KV-AR252 Series, KV-AR34M80B, KV-AR34X80B, KV-AR29M80B, KV-AR29X80B, KV-AR25M80B, KV-BT21 Series, KV-BM14 Series, KV-BM21 Series, KV-XR Series

Article ID: 5564 (modified: 3/20/2006 10:03:00 PM)



Problem/Question:

The TV standby indicator flashes when switching on the TV


Solution/Answer:

When switching on the TV, the standby indicator flashes green for a few seconds before the picture rises. This does not indicate a malfunction.

The picture rise time (about 14 seconds) is needed for TV to perform some internal processing. However the sound can be heard (in about 3 seconds) before the picture appears on the screen.

If the TV microcomputer detects some technical fault in the circuitry, the LED will continue to blink with no picture appearing on the screen. If this happens, please switch off the set and arrange for Sony service to check on the set.

[JayCee]

[quote=micks_address;3724874]This from sony''s web site http://www.css.ap.sony.com/quote]

Which is a waste of time since these models were not released in the UK...that site is for models released in Asia/Pacific area.

[micks_address]

might be a waste of time, but the consensus is - if you have a flashing led then you need a service engineer to look at it... had the same problem with my kv32fq86 a few years ago... led flashed i think 7 times and it wouldnt power on.. got a replacement as it was only new... best of luck