Philips 28PW9617

03-07-2002, 1:17 PM

Is there a volume display on the 9617 which gives a display of volume level when changing volume, if so how do you get it up on screen. Also don't seem to be able to get the set to work from my sky digital remote, have tried reprogramming remote using Philips code of 0081 but no joy. Any advice would be appreciated.

cheers

Gerbil · 03-07-2002, 2:31 PM

I couldn't get the Sky digital remote to work with my 28PW9617 either.

In the end I used it as an excuse to buy a Phillips pronto remote.

Unfotunately I don't have the TV at the moment coz it was doing this

If you find a solution to the Sky Remote I'd be interested as my wife still uses it in preference to the Pronto.

ps Sorry about the scary picture

04-07-2002, 5:08 PM

Cmon guys some of you 9617 owners must have some info.

04-07-2002, 5:31 PM

I don't know if this will work on your 9617, but on the 6515 that I used to own, I was able to hold down the info key on the remote for about 5 seconds. After that, when you change the volume, it should show you the indicator on screen (or it might come up automatically before then).

rct · 05-07-2002, 7:58 AM

Sorry for the delay Arch... If you go into interactive on Sky and Select Customer Services you will be able to find a list of Philips codes... I seem to remember having to try four or five before it worked. on my 9617. Write down all the codes and try them one by one. Good luck.

08-07-2002, 7:41 PM

I got my sky remote to work my 9617 first time.
I used a code off the web, think it came from: http://www.satcure.com/tech/digicode.htm

HTH Arthur

08-07-2002, 8:59 PM

rct: thanks for the help, went to sky page you suggested andtried all the codes without any joy.

abl: Thanks also will try these codes tomorrow.

Really appreciate the help, anyone know if there is a display showing volume level when you increase/decrease volume.

08-07-2002, 9:24 PM

Didn't holding down the info button for 5 seconds work then?

08-07-2002, 9:36 PM

Squirrel god

sorry, yes i did try it, I assume you meen the button with the i+ symbol that gives you the various info at the top of the screen for a few seconds, if it is this one, then no it had no effect. Ment to ask you about this but forgot.

08-07-2002, 9:46 PM

Yes, that's the one. Oh well... worked on the 6515... weird

09-07-2002, 12:13 AM

Has anyone got the Philips remote to control a sky digibox, or anything else for that matter.
I like the remote but I haven't been able to get it to work my sony VCR or pioneer DVD...

puc · 09-07-2002, 7:46 AM

The remote for my 28pw6006 will not operate my Sony vcr either but my sky remote DOES operate the TV. Weird

03-07-2002, 1:17 PM	#1
Arch Guest Posts: n/a	Philips 28PW9617 Advertisement Want to Advertise? Is there a volume display on the 9617 which gives a display of volume level when changing volume, if so how do you get it up on screen. Also don't seem to be able to get the set to work from my sky digital remote, have tried reprogramming remote using Philips code of 0081 but no joy. Any advice would be appreciated. cheers
	Quote

04-07-2002, 5:08 PM	#3
Arch Guest Posts: n/a	Cmon guys some of you 9617 owners must have some info.
	Quote

04-07-2002, 5:31 PM	#4
Squirrel God Guest Posts: n/a	I don't know if this will work on your 9617, but on the 6515 that I used to own, I was able to hold down the info key on the remote for about 5 seconds. After that, when you change the volume, it should show you the indicator on screen (or it might come up automatically before then).
	Quote

08-07-2002, 7:41 PM	#6
abl Guest Posts: n/a	I got my sky remote to work my 9617 first time. I used a code off the web, think it came from: http://www.satcure.com/tech/digicode.htm HTH Arthur
	Quote

08-07-2002, 8:59 PM	#7
Arch Guest Posts: n/a	rct: thanks for the help, went to sky page you suggested andtried all the codes without any joy. abl: Thanks also will try these codes tomorrow. Really appreciate the help, anyone know if there is a display showing volume level when you increase/decrease volume.
	Quote

08-07-2002, 9:24 PM	#8
Squirrel God Guest Posts: n/a	Didn't holding down the info button for 5 seconds work then?
	Quote

08-07-2002, 9:36 PM	#9
Arch Guest Posts: n/a	Squirrel god sorry, yes i did try it, I assume you meen the button with the i+ symbol that gives you the various info at the top of the screen for a few seconds, if it is this one, then no it had no effect. Ment to ask you about this but forgot.
	Quote

08-07-2002, 9:46 PM	#10
Squirrel God Guest Posts: n/a	Yes, that's the one. Oh well... worked on the 6515... weird
	Quote

09-07-2002, 12:13 AM	#11
abl Guest Posts: n/a	Has anyone got the Philips remote to control a sky digibox, or anything else for that matter. I like the remote but I haven't been able to get it to work my sony VCR or pioneer DVD...
	Quote