JVC CTV Service Ajustments

10-07-2006, 5:16 PM

Hi,

Service Mode Adjustments for "JVC CTV Mod AV-28GTISJF".
Does any member have details of Service Ajustment Proceedure for the above CTV or Factory setting default.

Regards

Nick.

mctech · 10-07-2006, 6:11 PM

What is the problem with the set

11-07-2006, 1:20 PM

[There is E-W Distortion ]

JayCee · 11-07-2006, 2:27 PM

Quote:

Originally Posted by NickBarfoot

[There is E-W Distortion ]

You seem to have posted this subject twice within the forum.
The most likely cause of your E/W distortion is IC502 which is a 24LC16B EEPROM mounted at the front L/HS of the circuit board.
That model uses the Vestel 11AK45B chassis and you have the most common fault on it...pre-programmed EEPROMs for that model are available from SEME-NEDIS on 0870 850 8501.

11-07-2006, 5:04 PM

Thanks for your help. It has been sometime since i hanged up my Avo
I bet that Lopts fail and still give problems in these wide screens? So
apparently E-W circuits. Memories of Phillips G11.

10-07-2006, 5:16 PM	#1
NickBarfoot Guest Posts: n/a	JVC CTV Service Ajustments Advertisement Want to Advertise? Hi, Service Mode Adjustments for "JVC CTV Mod AV-28GTISJF". Does any member have details of Service Ajustment Proceedure for the above CTV or Factory setting default. Regards Nick.
	Quote

11-07-2006, 1:20 PM	#3
NickBarfoot Guest Posts: n/a	Jvc [There is E-W Distortion ]
	Quote

11-07-2006, 5:04 PM	#5
NickBarfoot Guest Posts: n/a	Jvc Thanks for your help. It has been sometime since i hanged up my Avo I bet that Lopts fail and still give problems in these wide screens? So apparently E-W circuits. Memories of Phillips G11.
	Quote