Hi,

i have tried to fix some geometry bug but haven't found any setting in the geometry menu to fix it. Then i have tried other setting in other menus and though i've tried to be careful i think i've changed something and now the white is too shiny in my opinion.

Does anyone have the service menu for my TV (or similar because the menus are similar) with some default setting so i can put in the way it was ? Or could someone tell my which setting did i changed ?

Thank you very much

[per-Sony-fied]

The service menu should have a *reset to default* option.

Otherwise I'm suspecting this is very similiar to mine, In the service mode menu any adjustments that can be made there are default listings beside each setting so if you mess around you can see at a instance what the original setting was.

if there is a reset to default option then it must be in the first menu (theres a TT__ in the right upper corner) where you put only number and it makes a predefined action but i don't know which number does which action. I saw a list but it was for FS series and i don't know if its the same

and in the second menu where the list of setting are, there is only range of the setting displayed not the default value

[HowieC]

There's no reset to default on this chassis, if you have changed something without noting a previous setting there's no way back.
If white is too bright try turning the contrast down.

Worth saying once again.

***Some of the adjustments in the service menu can Disable your set and require major repair work. DO NOT just fiddle to see what they do, some can kill your set.******

[per-Sony-fied]

Try this site.... Sony

Menu for the FX series (I.E mine) some menu's/adjustments may look familiar.
Tells you about all the TT codes known.

thanx, i´ll try something