AVForums

Our philosophy in our forums, reviews, podcasts and feature videos is to promote audio and visual excellence by gathering and sharing the best information and resources available.

Help

To begin please visit our help section »

Not a Member Yet?

It only takes a minute to start enjoying the benefits of AVForums membership, and it's free!

Member Log in

Panasonic TXPB50C CRT/IR remote Probs

Post Reply
Old 04-01-2004, 3:22 PM   #1
Tony_Anon
Guest
Posts: n/a
Panasonic TXPB50C CRT/IR remote Probs

Hi,

Bought a Panasonic 32PB50C from currys about a year ago. Couple of months ago noticed a high-pitched buzzing electrical-sounding noise from the back which got steadily worse. At one point it was so bad, you had to put tv volume up. About the same time, I noticed it wouldn't start with the remote in the morning (was on standby all night). When it did, I could only switch it on but couldn't press any menu buttons/volume control etc.
After about 30 mins, it all started working ok. Currys technician came out and had a look. Said it had to be taken away.
He said the PB50C (built-in Dolby 5.1) isn't one of their best ones and he'd never heard of it! About 4 weeks later, it came back apparently with a new CRT and IR receiver board/chip on TV. Same thing happened again! Noise from back and remote probs. They said the CRT cost 600 quid!
I don't think they did jack s*** with it. Also, I heard that some models actually have a phillips tube in them! I got the tv replaced via warranty and went for sony. Almost all my electrical items are
Panasonic. I won't be buying them again! I even emailed Panasonic and got no reply. Terrible customer relations.

Has anybody else had picture/remote control probs with the PB50C?
  Quote
Old 04-01-2004, 8:55 PM   #2
Member
Join Date: Feb 2002
Location: Bristol
Experience Points:
6,075, Level: 18
Points: 6,075, Level: 18 Points: 6,075, Level: 18 Points: 6,075, Level: 18
Activity: 0%
Activity: 0% Activity: 0% Activity: 0%
Thanks: Gave 2, Got 37
Posts: 696
Hi Tony , I had three of these until I gave up and got a refund

the first one had a buzzing noise, this was fixed (set was only days old when they took it away for repair) . However some months later I noticed a mark on the inside of the tube so i got it replaced.

2nd set had a great picture but bad geometry

3rd set had a bad picture so I got my mony back

I can't remenber if i had a remote problem but I do know panny had a known issue with buzzing scan coils on this set .
  Quote
Post Reply



Thread information and display options
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off