Pace Ds810xe Hd/satellite Receiver

[bumblebee57]

Last week I purchased a PACE DS810XE HD/ Satellite receiver
to receive HD channels from the continent, after setting it up
to receive Astra 19.2 & Hotbird 13.0 degrees, I found that all the channels have been installed together ie :- 01 to 2000
approx, it does not seperate and name the satellites individual.
The only way you can locate a certain channel is to scroll through all of the listed channel numbers, and certain channels
you require on a regular basis, you can store in your favourite
location.
I find it strange that satellite position have not been seperated, if I have done all the right things whilst installing ?
and setting up the system.
Any comments welcomed.

regards :- Bumblebee57

[John Henry]

You can seperate the channels, you have to select it from one of the colour coded buttons and it will then give you a few options to choose from.

[richard napier]

I just brought mine a few weeks ago - now I have 28 & 19 stored - there is a filter that will seperate by satellite,HD/SD,cam/free,A>Z etc.. Did you update to the latest software download vers.18 ? -

Originally Posted by bumblebee57

Last week I purchased a PACE DS810XE HD/ Satellite receiver
to receive HD channels from the continent, after setting it up
to receive Astra 19.2 & Hotbird 13.0 degrees, I found that all the channels have been installed together ie :- 01 to 2000
approx, it does not seperate and name the satellites individual.
The only way you can locate a certain channel is to scroll through all of the listed channel numbers, and certain channels
you require on a regular basis, you can store in your favourite
location.
I find it strange that satellite position have not been seperated, if I have done all the right things whilst installing ?
and setting up the system.
Any comments welcomed.

regards :- Bumblebee57

[richard napier]

Help I having nasty problems with the remote for this receiver - press
a channel number - the menu comes on ! - press EPG - the set up comes on . Everything is mixed up & at random. However, the onboard receiver controls are ok - but are only suitable for channel hopping. Anybody know
if there is a special reset on the remote ie 2 buttons at once.

[SamRadford]

Have you tried rebooting?

[richard napier]

No I have not tried this yet - give it a go later ! Thanks !

[richard napier]

Problem solved ! - Should have thought of that before. Now all my gear is coming out off standby everynight!