AVForums.com twitter AVForums reviewers are ISF Certified.  Click for more information. AVForums is a member of CEDIA.
AVForums.com is the UK's biggest & best home consumer electronics discussion resource


Forums Register Blogs Information Social Groups Search Today's Posts Mark Forums Read
Go Back   AVForums.com > Digital TV Receivers and Services > Satellite TV

Notices


Reply
 
Thread Tools Display Modes
Old 05-01-2004, 2:57 PM   #1 (permalink)
MarkEmmett
Guest
 
Posts: n/a
Freeveiw Signal Strength

HI there I have just installed a Pioneer DBR-TF100 receiver it is connected to a new loft aerial and I am getting 53 channels all with very good picture but have not been able to get BBC1 & BBC2 when going through the set up I am getting 60-70 % signal strength and it says signal quality good should I be able to get a stronger signal ?

Thanks Mark

Last edited by MarkEmmett; 05-01-2004 at 5:46 PM.
  Reply With Quote
Old 05-01-2004, 7:10 PM   #2 (permalink)
Senior Member
 
Johndm's Avatar
 
Join Date: Jan 2003
Location: Bedford UK
Posts: 1,632
Thanks: Gave 21, Got 39
Re: Freeveiw Signal Strength

Quote:
Originally posted by MarkEmmett
HI there I have just installed a Pioneer DBR-TF100 receiver it is connected to a new loft aerial and I am getting 53 channels all with very good picture but have not been able to get BBC1 & BBC2 when going through the set up I am getting 60-70 % signal strength and it says signal quality good should I be able to get a stronger signal ?

Thanks Mark
Is the aerial a wideband one?

I just installed the Pioneer, had to change mine.

Also had a peculiar loss of some channels due to RF interferance from another unit!

Check the channel numbers for your area from the BBC transmitter info site, and see if you have any VCR/Digibox/DVD recorder outputting RF on a similar channel number.

Sorted mine out.

My signal 60% to 85%

regards
Johndm is offline   Reply With Quote
Old 05-01-2004, 7:55 PM   #3 (permalink)
Aydon
Guest
 
Posts: n/a
I bought my in-laws a Pace box for Christmas - set it up and it found 87 channels - came as a shock as I was expecting 30!

The Signal strength was around 60 - 65 % so I was happy with that - BBCs and ITVs were fine quality wise.
  Reply With Quote
Old 06-01-2004, 4:09 AM   #4 (permalink)
MarkEmmett
Guest
 
Posts: n/a
Thanks for your replys I have got a wideband aerial but it is in the loft and it has got a ct100 down lead I have had a look the BBC tv reception web site and from what I can make of it I think I need to tune the stb on channel 68 This is the Dover transmitter if this is wrong please let me know .

Thanks Mark
  Reply With Quote
Old 06-01-2004, 6:34 PM   #5 (permalink)
Senior Member
 
Johndm's Avatar
 
Join Date: Jan 2003
Location: Bedford UK
Posts: 1,632
Thanks: Gave 21, Got 39
Quote:
Originally posted by MarkEmmett
Thanks for your replys I have got a wideband aerial but it is in the loft and it has got a ct100 down lead I have had a look the BBC tv reception web site and from what I can make of it I think I need to tune the stb on channel 68 This is the Dover transmitter if this is wrong please let me know .

Thanks Mark
Bit confusing for your area, try this below........

03. How do I know if I can get DTT and do I need to upgrade my existing aerial?

UHF channels are numbered 21-68. The type of aerial you will require to receive DTT will depend on the channel frequencies of the transmitter you intend to receive DTT from.

First check the likelihood of being able to receive DTT in a postcode checker, http://www.freeview.co.uk/canireceiv...iew/index.html or http://www.dtg.org.uk/retailer/coverage.html. You could also borrow a STB from a friend and/or contact a local aerial installer to inquire about the reception of DTT in your area.

If either postcode checker says you are unable to get DTT, it may still be possible, depending on your location and the terrain. (*) Additionally, if either postcode checker says that you cannot receive certain channels, it may be possible with an aerial upgrade, depending on the power of the missing mux(es).

(*) Line of sight maps between you and the relevant transmitter can be created here. The NGR values can be obtained from the Streetmap and Wolfbane sites (see below). The height above ground of the distant aerial (m) is the AOD (m) value (preferably the lowest) obtained from the Wolfbane site.

To find your local DTT transmitters you will need a grid reference from where you live. This can be obtained from http://www.gazetteer.co.uk/index.html or http://www.streetmap.co.uk/streetmap.dll?GridConvert? (enter your postcode, select Postcode underneath, click Convert and use the LR value obtained in the Wolfbane site below).

Put the grid reference into both of these links: http://www.wolfbane.com/cgi-bin/tvd.exe? and http://www.wolfbane.com/cgi-bin/tva.exe?.

This will then give a list of both ATT and DTT transmitters in your area.

Compare the aerial groups of the transmitter you intend to receive DTT from in both of the above links. If the groups are the same you should be able to receive all the Freeview channels, depending whether the strength of each of the muxes is sufficient (many DTT transmitters have muxes transmitting at different powers).

If the aerial groups are different you will need to upgrade your aerial to receive all the Freeview channels.

Last edited by Johndm; 06-01-2004 at 6:39 PM.
Johndm is offline   Reply With Quote



Bookmarks

Tags
freeveiw, signal, strength
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


All times are GMT. The time now is 2:50 PM.

AV Forums
Optimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2009 M2N E. & O. E.
Global Gold
Web Hosting