AVForums.com is the UK's biggest & best home consumer electronics discussion resource New to AVForums.com? Start by reading our introduction here.


Go Back   AVForums.com > Home Cinema Construction and Configuration > Room Acoustics, Audio and Video Calibration

Reply
 
LinkBack Thread Tools Display Modes
Old 10-12-2006, 11:14 PM   #1 (permalink)
Senior Member
Join Date: Dec 2003
Posts: 1,548
iTrader: (2)
Thanks: Gave 16, Got 71
Question BFD or passive room treatment

Following the successful soundproofing of my room and the rearrangement of the furniture the sound quality has reduced with the exception of the subwoofer ( Rel Quake). This has gone from being acceptable to very poor, I now have a very large boom at about 80Hz and unable to hear anything below 50Hz.

I have tried moving the sub around but its location is now limited by domestic aesthetics.

Therefore I was thinking about either buying a BFD or the more traditional room treatments from RPG.

I have read the beginners guide to the BFD but technically I am incompetent and it only relates to a small part of the frequency range but the bass quality is very poor.
Londondecca is offline  
Reply With Quote
Old 11-12-2006, 12:14 AM   #2 (permalink)
Member
 
Tommy Angelo's Avatar
Join Date: Mar 2004
Posts: 492
iTrader: (2)
Thanks: Gave 65, Got 23
Re: BFD or passive room treatment

I have a BFD and it works better than I expected, when used with Room EQ Wizard and a Radioshack SPL meter its pretty simple to do.

The fact you have lost the deepest bass could be a problem though unless you have a sub with a lot of headroom you don't use, because trying to push up the gain on low frequencies could cause clipping of the sub or distortion.

Putting the sub in or near a corner is a good way to boost the lowest frequencies but it sounds like you've run out of places to put it.

If there's anywhere left to try placing the sub, that is definatly the best start but I would still recomend a BFD to flatten everything out.

The other problem might be the relationship between the main speakers and sub because your peak is likely to be in the crossover. Try playing with the phase on the sub to see if this improves things.

Hope this helps in some way.

Andrew

Edit: You say the sound quality has reduced? I assume you mean improved?
__________________
My Home Cinema - Optoma HD70, Denon AVR-3805, Monitor Audio Bronze B4 x2, B centre, BFX x4, SVS PB10, BFD, Sky HD, Denon DVD-1910, Senn HD 485, Nintendo DS, PSP, Wii.
Near Silent PC - Intel C2D E6700 (OC to 3.4Ghz), 2Gig RAM, 8800 GTS 640 OC, Vista.
Car - BMW E36 318iS coupe (M44)

Last edited by Tommy Angelo; 11-12-2006 at 12:19 AM.
Tommy Angelo is offline  
Reply With Quote
Old 11-12-2006, 9:43 PM   #3 (permalink)
Ex Member
Join Date: Jul 2003
Location: maidstone
Posts: 2,105
iTrader: (1)
Thanks: Gave 110, Got 108
Re: BFD or passive room treatment

Londondecca, what have you changed in the room?
mattym is offline  
Reply With Quote

Bookmarks

Tags
bfd, passive, room, treatment


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 5:13 PM.

AV ForumsOptimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2008 M2N E. & O. E.
Global Gold
Web Hosting