RU990 Help please

[madpup]

Hi guys and girls im new to this and im after a little help please,
i bought the ru990 and iv had a good go at programming it but im stuck and i need the following i would be grateful for any help,

1) im after the CCF code for Sky+ (Amstrad)
2) im after the CCF code for AV control receiver Panasonic SA-HE7
3) im after the CCF code for satellite receiver Echostar AD3600ip Viaccess
and finally the CCF code for DVDR Sony RDR-GX300

Thanks for looking

Mark.

[stoobie]

Hi Mark

Have a look over at RemoteCentral there are hundreds of files for download.

Your model uses PCFs but you can import a CCF and use the codes (the actual layouts will not really suit your remote tho'). You can look either under Pronto Classic (CCF) or Pronto NG (PCF) and you will find loads of each.

If you cannot find your precise model, it is always worth trying a similar model as often the codes from them work. (My Panasonic uses the same codes as about 6 other models I found on RemoteCentral)

Of course, if you can't find what you are looking for, you could just download a PCF that you like the look of and learn the codes into it from your original remotes!

Good Luck

Stoobie

[madpup]

Thanks Stoobie you are right, it is PCFs that i need, checked over at Remotecentral they haven't got what i need but i'll take a look at similar items maybe i can use one or two..

regards

Mark

[Jules]

You could try my Sky PCF. Here it is.

My full PCF is huge, so I've deleted everything except the Sky device to keep the attachment as small as possible.

[madpup]

Many thanks for that Jules, im sure i can use the colour buttons on your setup

regards

Mark