[system85]

i dont get manage to make my BDP-S350 region free

i ve already got the new code from the hotlineservice, so my Kamelon 8060
has now "learned" the BDP-S350.

but when I go through the procedur I am posting now... nothing happens

or is this the wrong procedur?

I Hope anyone can help me....

Full procedure for a oneforall remote is as follows:

1. Press DVD
2. Hold the magic button until the DVD button flashes twice.
3. Press 0533

4. Hold the magic button until it flashes twice.
5. Press 994
6. Press Magic Key (don't hold)
7. Press 00189 (if your oneforall remote uses 4 digit or 3 digit codes, use less leading zeros)
8. Press 1 ( this sets it to key 1 - it flashes twice )

9. Hold the magic button until it flashes twice.
10. Press 994
11. Press Magic Key (don't hold)
12. Press 00255
13. Press 2 ( this sets it to key 2 - it flashes twice )

14. Hold the magic button until it flashes twice.
15. Press 994
16. Press Magic Key (don't hold)
17. Press 00095
18. Press 3 ( this sets it to key 3 - it flashes twice )

19. Hold the magic button until it flashes twice.
20. Press 994
21. Press Magic Key (don't hold)
22. Press 00221
23. Press 4 ( this sets it to key 4 - it flashes twice )

24. Hold the magic button until it flashes twice.
25. Press 994
26. Press Magic Key (don't hold)
27. Press 00079
28. Press 5 ( this sets it to key 5 - it flashes twice )

The remote is now programmed and ready to use, to make the BDP-S350 region free:

1. Use the remote that came with the player to bring the player out of standby, make sure there isn't a disc in it.
2. Press 1, 2, 3, 4, 5 on the oneforall remote. The 24p light will start flashing
3. Put the player back into standby with the Sony remote
4. Next time you turn on the player it will be region free for DVD playback.

[ZippyNL]

Do you get the two blinks where it states in the instructions? As the Kameleon is an older model it only uses 3 digit codes for programming extra functions. So everywhere that you see the double zero (steps 7, 12 etc) remove it. Then try the procedure again, and hopefully it should work.
Hope this helps