[Max Payne]

Hi There,

A weird one here,

tonight and at the moment I have my projector on and when the lights are off all is fine and the projector works perfectly, but when I try to have dim the room, 2 rolling lines occur along the image.

Anyone ever had this problem and know how to rectify it?

[tfboy]

My guess is the loading on the dimmer has induced an interference on the signal feeding your projector. I'm assuming you're running over analogue (composite, component or svideo) ?

If possible, try moving the your video cable around and see if it has an impact. Of course, this may not be feasible.

Edit: do you get the same rolling lines with both NTSC and PAL DVDs ? Worth a try

[Max Payne]

Thanks for the reply,

Yes I running it through component. I have tried fiddling with the connections to see if that was the reason and it doesn't seem to be the problem.

I have just realised that the problem is probably because Im using a spare button on the projector remote in order to control the dimmer. I will try a different remote on the dimmers later and see if it rectify's the problem....(I hope)