[T0rNaDo]

ceiling mount is out of the question..
as it would be too close to the screen to get a 220cm pic.

so im going to have to mount it on the wall... 5m away from the screen.

dont fancy a shelf. so plan on using a mount..

wot would be best height to mount it....

i want to do it high enough so if u walk in front of it
u dont get blinded in the face from the light..

but i dont want to put it to high to find, its not right projecting to the screen.


thxs...

[T0rNaDo]

23 views


and not one person with a wall/shelf mounted Z4

[paul1967]

I mounted mine on the rear wall about 5ft 6" using a kitchen work surface as base .

[T0rNaDo]

cheers for the reply paul1967

so thats 5ft 6" high from the floor ?

il get the tape measure out and see wot thats like on the wall..



any more........

[PICKY737]

Heres my mount from Ikea.

[bravogolf]

Howdy. I use this to mount my Z4 to the wall and it's perfect

[T0rNaDo]

Originally Posted by PICKY737

Heres my mount from Ikea.

hey thats a nice idea..

though it wouldnt work on my wall..
plus i dont use cds.. all music i have is on pc..

sure looks nice though...

[T0rNaDo]

Originally Posted by bravogolf

Howdy. I use this to mount my Z4 to the wall and it's perfect

thats nice ..... easy and simple mount.. looks good too..

thxs for info there..

how high is ur Z4 mounted from the floor ??

thxs.

[linkster]

I use a wall bracket designed for a microwave, about the same height as the chap mentioned earlier. Ideally I'd have had it higher - make sure it's above your head height!

[spooney]

Mine is on a shelf which acts as a room divider between the office space and the HT. I put it on the top of the shelf resulting in 156 cm = 61.42" from the floor.

Stating the obvious here: The Z4 gets fresh air from the back and blows the heat to the right. You will need suffcient space to the back and to the right. If you put it into a shelf it may well circle the hot air around. This is one of the reasons I put it on top. The second: It is almost in the center of the screen, only a few inches left and above. The third: Perfect distance to the screen: 4 m (157") for a 90" diameter screen.

I used the calculator on their webpage to calculate the distance

[bravogolf]

Originally Posted by T0rNaDo

thats nice ..... easy and simple mount.. looks good too..

thxs for info there..

how high is ur Z4 mounted from the floor ??

thxs.

Hmmm, It's about 6ft, maybe 6.5 from the floor. If you need any specs feel free to PM me

[T0rNaDo]

Originally Posted by linkster

I use a wall bracket designed for a microwave, about the same height as the chap mentioned earlier. Ideally I'd have had it higher - make sure it's above your head height!

i got some speaker mounts. that proberly would work. holding it from its sides.
but i think it would look a bit pants..

sooner have it mounted upside down on a proper mount.

yer i will make sure it is above head height.
so u dont get blinded when u walk past it.

Originally Posted by spooney

Mine is on a shelf which acts as a room divider between the office space and the HT. I put it on the top of the shelf resulting in 156 cm = 61.42" from the floor.

Stating the obvious here: The Z4 gets fresh air from the back and blows the heat to the right. You will need suffcient space to the back and to the right.

Perfect distance to the screen: 4 m (157") for a 90" diameter screen.

i dont want to use ashelf as it will be above the sofa,

yes i know to leave space at back for air.. plus the display magic II hdmi cable is fairly thick. so i need to make sure i leave room for that to curve in..

mine will be 5m from screen.. im hoping to use a 100" screen....... cant go anymore as to left of room half way along is a pillow wall..... this would block ur viewing if i use a bigger screen then 220cm wide.

but i think 100" will be plenty..

Originally Posted by bravogolf

Hmmm, It's about 6ft, maybe 6.5 from the floor. If you need any specs feel free to PM me

thxs il try at this height and see...

but cant do anything yet till i get all wallpaper stripped.
and this big 8ft pc desk down..

so im off to get stripping more paper

[T0rNaDo]