HT200 / i-scan pro display issues

24-06-2002, 12:26 PM

Hi,
I am using a Sony DVD player, sending a component signal, doubled by the I-scan into the HT200.
For some films, in parts (possibly on a horizontal panning scene?), the picture appears to 'spike', or digital artefacts appear.
It also happens with an S-video output from Sky (via RGB conversion), again doubled through the I-Scan.
Has anyone else experienced this, or can help me identify where the problem may lie?
Thanks

chips · 24-06-2002, 2:29 PM

Hi,

The output from iscan is via a "D" connector (VGA). To connect to an HT200 you need a special lead made up with "D" connector at iscan end and phono plugs at HT200 end, to go into the HT200 component phono sockets.

If you are using a computer type lead going into the VGA socket on HT200, this could be your problem.

25-06-2002, 7:18 AM

Chips,
Thanks for the response, but I've got a D sub->component lead as recommended by Sim2.

chips · 25-06-2002, 8:09 AM

Hi again,

It's not that then, have you got the latest software installed? V1.2 I think.

Try talking to Owl Video Tech Support.

24-06-2002, 12:26 PM	#1
mabar1 Guest Posts: n/a	HT200 / i-scan pro display issues Advertisement Want to Advertise? Hi, I am using a Sony DVD player, sending a component signal, doubled by the I-scan into the HT200. For some films, in parts (possibly on a horizontal panning scene?), the picture appears to 'spike', or digital artefacts appear. It also happens with an S-video output from Sky (via RGB conversion), again doubled through the I-Scan. Has anyone else experienced this, or can help me identify where the problem may lie? Thanks
	Quote

25-06-2002, 7:18 AM	#3
mabar1 Guest Posts: n/a	Chips, Thanks for the response, but I've got a D sub->component lead as recommended by Sim2.
	Quote