| RGB on SONY HS1
Following advice on previous threads I have modified the Sony multi Cable to fit a SCART connector and attached the Composite sync to Green with a 47 Ohm Resistor. ( The rationale behind this is to get the best Picture out of the SKY digibox )
The good news is that it works and makes improvemnts on colur balance and particuarly noise levels ( e.g as visable on the menus around the lettering ).
However the picture suffers from a Moire type effect of diagonal moving pattern which is too irratating to make useful.
Does any one else using a sync on Green with a projector have this issue or even better a solution ! Thanks
| 
Similar Threads 
Linear Mode
