[sadpup]

Right here goes ill try not to get too confusing here not even sure what forum to post this in but ill try here.

Units i have SKY+ , Toshiba 36"CRT, Pioneer DVR 433H and Epson TW600

At the moment i have the TV connected to the Sky+ on the RGB output scart
The TW600 is connected to the DVDr on a component lead.

The problem i have is the sky box only has one RGB scart on it and i need to feed the DVDr with a second RGB scart feed to improve the picture i get on the projector when watching sky.

The DVDr will not pass an RGB signal thru when the component is turned on, so i can not connect it that way GRRRRRRRRR!!!! can anyone suggest how i can get an RGB signal to both my CRT and DVDr at the same time?

[sadpup]

Think i have just found my own answer

http://www.letsautomate.com/12069.cfm

Anyone any other ideas?

[Kalos Geros]

Originally Posted by sadpup

Think i have just found my own answer

http://www.letsautomate.com/12069.cfm

Anyone any other ideas?

Look no further, that's exactly what you need and it looks like it's of good quality...