1:1 AE700 via HDMI

[Lizard]

Hi All
Don’t mean to be a pain if this has already been covered, but has anyone been able to achieve 1:1 pixelization with the Panasonic AE700 via a HDMI input and if so what settings did you use?
There are no shortage of settings out there for achieving this via the VGA input but they don’t seem to work when used on the HDMI input and I am not keen to have to buy a new cable if it can be avoided.
Thanks
Lizard

[jmbrailsford]

Hi,
I found this thread whilst searching for a solution to my own problem.

HDMI 1:1 help maybe

[Lizard]

hi jmbrailsford
Alas it hasn't help much, lots of people say it can be done but know one is sure how. Thanks anyhow. Whats your problem i may have come across it in my endless search on the HDMI issue?
Lizard

[jmbrailsford]

Originally Posted by Lizard

hi jmbrailsford
Alas it hasn't help much, lots of people say it can be done but know one is sure how. Thanks anyhow. Whats your problem i may have come across it in my endless search on the HDMI issue?
Lizard

Pity,
I'm trying to find out optimum throw distance for 203cm screen.

See my thread for more info - my problem

Thanks,

Mike.

[sniffer66]

Hmm, anyone know if this was fixed with the 900 ?

I've got 1280x720 50 hz over hdmi from my HTCP and with the nokia test pattern I was able to get the entire grid to screen edge. This made me assume 1:1 (and no cropping)

[Lizard]

Hi Sniffer66
It has meant to have been fixed with the 900 as it has a new pixel lock option with the HDMI input like the 700 has with the VGA input, but as i dont have one i cant say for sure. As you have your 700 connect via a PC i have posted below a link to one of the set ups that is meant to give you 1:1 and no cropping.
Its post No.838 towards the bottem
http://www.avsforum.com/avs-vb/showt...&page=28&pp=30

jmbrailsford
Have you tried going to the panasonic site to see if there is a projection calculator for the 700 that might give you the figures you need? Sorry its all i can think off.