Which wall mount for Pioneer PDP-436XDE?

Ripstop · 07-11-2005, 5:16 PM

Finally making the big buy and investing in a Poineer PDP-XDE436 for Chrimbo. I intend to wall mount it but haven't figured out how to bury the cables in the wall and make a neat job of it. Fortunately it will only have the two black and white cables and a mains feed. Anyways....what I really want to know is what you guys have used to mount it on the wall, the pioneer ones or another make? All suggestions on a postcard please. Oh and if you have any ideas on burying cables let me know.

Dave A · 07-11-2005, 5:21 PM

My 436XDE was delivered today

Following advice from another forum member I have gone for the flat mount supplied by RS100 (they advertise on this site). It was £65 including delivery, although it is basic it looks up to the job. I'm planning on installing it tomorrow.

If you hear a load bang and then crying you know it did not work

Ripstop · 07-11-2005, 11:09 PM

I have visions of drilling several large bolt holes in the wall and the neighbours going potty. I saw some info in another thread and it does look up to the job. Some of the manufacturers mounts are very espensive for what they are, even though they may have to hold up several tens of Kg of glass and metal.

BigBilly · 08-11-2005, 7:37 AM

I used the Pioneer wall mount for my 506.

No faffing about involved, easy peasy attaching parts to panel.

4 screws to fix mount to plasterboard wall (used noggins).

Up it goes, 30Kg on the wall, safe as houses, completed in about 2 hours. Only took that long because I had to insert noggins behind plasterboard.

Billy

kevlar · 08-11-2005, 9:14 AM

Wouldn't plasterboard be sufficient without noggins as long as enough fixings of the correct type were used? Say 6 or 8 of these http://www.screwfix.com/app/sfd/cat/...41105&id=12635 ?

07-11-2005, 5:16 PM	#1 (permalink)
Ripstop New Member Join Date: Aug 2005 Posts: 27 My movie collection iTrader: (1) Thanks: Gave 2, Got 0	Which wall mount for Pioneer PDP-436XDE? Finally making the big buy and investing in a Poineer PDP-XDE436 for Chrimbo. I intend to wall mount it but haven't figured out how to bury the cables in the wall and make a neat job of it. Fortunately it will only have the two black and white cables and a mains feed. Anyways....what I really want to know is what you guys have used to mount it on the wall, the pioneer ones or another make? All suggestions on a postcard please. Oh and if you have any ideas on burying cables let me know.

07-11-2005, 11:09 PM	#3 (permalink)
Ripstop New Member Join Date: Aug 2005 Posts: 27 My movie collection iTrader: (1) Thanks: Gave 2, Got 0	Let me know how the installation goes I have visions of drilling several large bolt holes in the wall and the neighbours going potty. I saw some info in another thread and it does look up to the job. Some of the manufacturers mounts are very espensive for what they are, even though they may have to hold up several tens of Kg of glass and metal.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wall mount Samsung LE32R41B	magper	LCD Brackets and Mounts	0	27-06-2005 3:33 PM
42 pv500 type of wall mount??	tim k	Plasma Brackets and Mounts	3	03-06-2005 9:32 PM
Help, Speakers to hide my wall mount Plasma	chelleon	Speakers	7	04-08-2004 1:46 PM
Quick Q? - Panny PW6 and Slimline wall mount	D J Fryer	Plasma Brackets and Mounts	6	29-06-2004 3:13 PM
Fitting a Panny Th42pwD4 Unicol Wall Mount	bluebear	Plasma Brackets and Mounts	6	05-11-2002 8:20 AM


AVForums.com is the UK's biggest & best home consumer electronics discussion resource	New to AVForums.com? Start by reading our introduction here.
Search AVForums.com

07-11-2005, 5:21 PM	#2 (permalink)
Dave A New Member Join Date: Apr 2001 Location: Dorset Posts: 27 My movie collection iTrader: (0) Thanks: Gave 0, Got 0	My 436XDE was delivered today Following advice from another forum member I have gone for the flat mount supplied by RS100 (they advertise on this site). It was £65 including delivery, although it is basic it looks up to the job. I'm planning on installing it tomorrow. If you hear a load bang and then crying you know it did not work

08-11-2005, 7:37 AM	#4 (permalink)
BigBilly Member Join Date: May 2005 Location: Edinburgh Posts: 303 My movie collection iTrader: (31) Thanks: Gave 21, Got 4	I used the Pioneer wall mount for my 506. No faffing about involved, easy peasy attaching parts to panel. 4 screws to fix mount to plasterboard wall (used noggins). Up it goes, 30Kg on the wall, safe as houses, completed in about 2 hours. Only took that long because I had to insert noggins behind plasterboard. Billy

08-11-2005, 9:14 AM	#5 (permalink)
kevlar Senior Member Join Date: Nov 2005 Posts: 1,361 My movie collection iTrader: (0) Thanks: Gave 4, Got 77	Wouldn't plasterboard be sufficient without noggins as long as enough fixings of the correct type were used? Say 6 or 8 of these http://www.screwfix.com/app/sfd/cat/...41105&id=12635 ?