The JVC LT-26DX7 and LT-32DX7 thread

[GaryB]

Originally Posted by Petherro49

GaryB thank you very much for your advice on that. The set has certainly been untouched since I bought it, supposedly new fom the TV dept of a major department store - I had returned an unrepairable Philips 9616 and paid the difference. I wonder if this is an ex-diplay or returned set? The store no longer has the same department so I suppose the answer will be to find a JVC specialist. I doubt if the extended warranty will cover it.

Assuming that whoever covers the warranty is still around, it's certainly worth a try. They won't have any way of knowing how it was caused and it could just be a normal fault, so you should contact them and just say that the HDMI inputs aren't working and leave the rest to them.

[Petherro49]

Its a best first option, I will give it a try. PS3 is fine through component but without HDMI may suffer disc restrictions later. Fantastic tv otherwise.

[Petherro49]

To update, I decided to let a reputable local Panasonic/JVC specialist have a look and he found the problem to be a missing foam cover, at a light source near the HDMI ports if I understand correctly. Either missing since new or opened & lost before I got it. I suspect the latter - maybe a set returned for "repair" because of the Sky HDMI problem? Anyhow I will never know and have asked for the part to be fitted. HDMI now working with a temporary repair (black stick tape).

[palsapal]

Not sure what's changed with my LT-32DX7/JVC PVR setup but switching off the JVC, when recording from the internal Freeview tuner, causes the JVC to blank the recording. I set the Pioneer recording & it records the program up to the point of switching off the JVC. They're connected using Scart from Ext2.

Any ideas?

[dangermain]

Does anyone know the three or four digit code for setting up a Sky+ (HD) remote control with a LT-26DX7 ? Want to get the volume control etc to work with the LT-26DX7.

I've tried all of the JVC codes I can find on various web pages and none work as yet. If anyone has actually had success making this work, I'd love to know which code you used. Thanks.

[dangermain]

I can answer my own question (see above):

The code is 0053 when using a Sky+ HD remote.