[5to1]

Having a strange problem with my 3g Iphone, on my netgear WPA-PSK wifi network.

It works fine with my neighbours unsecured network.

But with my network I can't seem to surf or pull any data once its connected. I've checked it gets an IP Address and even ping'd it from my laptop. So its connected fine and able to send/receive packets (ICMP atleast). But when I open the browser/maps/weather it just sits there like its not receiving anything.

I thought it maybe to do with the two DNS's it gets over DHCP, so edited it manually to one. But it still doesn't work.

Any ideas?

[Iain]

I had problems with my netgear router too, it was fine at first then it would just keep losing the connection. I tried the 'airplane mode' trick, it worked once or twice then it went back to losing the connection.
My sollution was a firmware upgrade for the modem (WPN824v2) no problems since then.
Hope this helps.
Iain.

[5to1]

Originally Posted by Iain

I had problems with my netgear router too, it was fine at first then it would just keep losing the connection. I tried the 'airplane mode' trick, it worked once or twice then it went back to losing the connection.
My sollution was a firmware upgrade for the modem (WPN824v2) no problems since then.
Hope this helps.
Iain.

Thanks, I'll give that a try.

Wierd thing is the connection is fine. Just can't seem to surf anywhere. Usually would point to a DNS problem because pings work. But have tried changing DNS settings and no change

Hi

Did you manage to get connected with the Iphone 3g, it doesn't work for me.

Can you please let me know what settings you have in the router are compare to mine below. Or if you remember what you change please let me know.

Using DHCP

Router Status:
Account Name WPN824
Hardware Version V2H1
Firmware Version V2.0.20_1.2.17 Latest

Wireless Settings:
Mode: b and g
Security Options: WPA-PSK [TKIP]
Password: 8 letters and 1 number

Wireless Router Settings:
Enable Wireless Router Radio: yes
Enable SSID Broadcast: no
Fragmentation Threshold (256 - 2346): 2346
CTS/RTS Threshold (256 - 2346): 2346
Preamble Mode: Auto

108Mbps Settings
Disable Advanced 108Mbps Features No
Enable eXtended Range(XR) Feature yes

Wireless Card Access List
Turn Access Control On: No

Some of the option have check mark if I have the option checked I put yes if not checked I put No

THANKS for you help