Where can i buy LNB connectors(?!)

[drdes]

My electrician has taken out the connectors out of the LNB and lost them. Can anyone tell me where I can buy them from and how much they cost?

Just to be clear, these are the metal tube shaped connectors which will go into the back of the Sky box and I think I need the small sized ones to fit the wires.

Thanks

[stevelup]

Just about anywhere... B&Q do them... Think they do a two pack for just over a quid.

[Ed the Penguin]

I work for Sky's 3rd party logistics provider, and if I can remember back to my picking days in the warehouse for Sky stock, you need an "'F' Connector".
If you need it for the dual cable (used for Sky+ boxes - the two thinner flexes stuck together) you'll need 2 "Dual Cable 'F' Connectors".

Unfortunately, I can't provide you the stock as it's for Sky engineers only.. And I need my job too much!

[drdes]

I have the dual cable - so I presume I just go to B&Q and ask for for two "Dual Cable 'F' Connectors"???

[croutledge]

This is what you are after

Philex Coaxial F Plug Pack of 10 - Screwfix.com, Where the Trade Buys

[drdes]

i have got the dual end f connectors. couple of questions,

1. after i have put the wire through the connector, do i just put the copper wire into the back of the sky box - or is there an adapter with a pin that i need
2 also, when i twist the wire through the connector, it doesnt make a tight enough fitting. so when i screw the f connector into the back of the sky bos, a little tug on the wire means that the wire just pulls out through the connector. how do i make the fitting tighter

any advice??

[drdes]

one more thing - the sky wire comprises of a black outer casing, then a middle section with lots of thin silver wires and then the copper wire in the middel. what do i do with teh silver threads - do i cut them? (i am strggling to cut them without cutting the copper wire in the middkle as well

are there any online guides (with photos!) that i can refer to since this simple task seems beyond me!!

[stevelup]

The outer braid should be folded back over the black bit and that is where the plug screws onto.

That's probably why your plugs are falling off.

Try this guide.