Fixing TH42PX60 to wall bracket

[Nickmoon]

I've just taken delivery of a Planny TH42PX60 and an i-mount tilting wall bracket bought off ebay. The latter comes with no instructions, and I was hoping some kind soul might give me some tips on how to fix the TV to the bracket
thanks

[Taz69]

Hi m8, the bracket should have some screws with plastic spacers if needed for this model aswell, these fixed to the back of the screen, you will see 4 round plastic grey covers on the back of the plasma, remove these with a screwdriver then fix the bracket or allen screws to the plasma.

If this is the one, http://www.imount.co.uk/index.php?ma...3b6b94e471cd96

Then you would fix the tilting brackets to the plasma, the back bar to the wall, then lift the plasma onto the bar and then there maybe some screws to lock the hooks into place.

Hope this helps

Taz

[RhythMick]

ebay has several mounts available for around £40 ish. The best advertisers ask you to check the distance between the mounting holes ...

Please note that this bracket will fit all TVs up to 63" including most 42" PLASMA and LCDs as well. However there are a few 42" and 40" TVs that have mounting holes spaced just too wide/long for this bracket. Please measure the horizontal and vertical spacings bewteen the mounting holes on the back of your TV.

The maximum dimensions that will fit for this bracket are 76cm horizontally and 50cm vertically. If the spacings are wider/longer than this we also offer an adapter plate that will accommodate anything 42"-63".

Anyone know what these dimensions are on the Panny TH42PX60 ?