False wall for plasma

I hope I will do a good job in describing this as I have no pictures avail to make it easier. When looking through AV magazines I se some amazing living rooms with what appears to be a false wall around the plasma. Kind of comes a metre or so either side so u can put ur speakers on also then runs up fush with the wall behind it. Any way what are these walls called and how easy are they to put up as my plasma is just bolted onto the wall by the frame and i dont like the fact you can see the frame. I dont want to put a hole in the existing wall to set the plasma back further however I would like to put up a false wal around it. The wall only needs to come out about 2 1/2 inches

Thanks

John

PS Ive found a pic below which is similar but I would want it a bit wider

here is an even better pic of what i need

[franc]

Hi. Its often referred to as a stud wall, false wall etc. Constructed from sawn timber which is literally screwed to the wall. Over this is placed plasterboard sheets which can either be skimmed (thin covering of finishing plaster to create a smooth surface ready to decorate) or taped and jointed along the plasterboard joints to hide them. Then to decorate.

All cabling can be hidden in the void which can/should be filled with some insulation.

The calculations will be the most difficult factor with you having to decide dimensions, depths etc. You can plan them out on the wall prior which should make the job easier.

Its a pretty straightfoward job for anyone with basic DIY skills and an electric drill. You might want to call in a plasterer to do the skimmed finish which should be no more than around £60.

Have a look at some of the threads on here which go to great lenghts to give you a step by step guide with pics too.

good luck

regards FRANC

[Xstyle]

OR... why not put it IN the wall???!

See my signature for expensive ideas!!!

Thanks for the info guys. Are there not any suppliers that supply these studd/fake walls for easy assembly? or special order once they have your dimensions?

John

[Mad Ad]

no you cant buy them made to measure but any carpenter in your local paper will be able to make one for you without too much fuss and should be finished the same day.

[stroppygoblin]

John,
These shots should give you some idea as to whats involved. It really is very easy to do and should not be out of the capabilities of the average DIY'er.

Let me know if you have any questions on construction or materials used.

[thfccambs]

That looks great,but how thicks the wood?Do you have a picture of it after it's been plastered.

[Kenny Glasgow]

Nice job

[stroppygoblin]

Originally Posted by hunts1uk

That looks great,but how thicks the wood?Do you have a picture of it after it's been plastered.

Thanks - As soon as it IS plastered I'll post some pics I've been away on holiday and not had chance to get the final touches done yet.

The wood is 12.5mm thick which is enough to cover most if not all types of cable. I've used flat scarts throughout, mainly for the tightness of bends that you can get where it meets the equipment. The plasterboard is a standard 9mm thickness so the total depth is a shade under 22mm. Once plastered, and painted It should all blend into the wall behind it.

looks good and gives me a good idea looking forward to seeing it plastered and painted, how did you put the shelves up?

John

[stroppygoblin]

The shelves are bespoke. (nothing commercially available was deep enough ) They are made of two real oak veneered mdf boards sandwidched together and then oak veneered. There is a slot cut in the back of each shelf, into which a 'T' piece of aluminium extrusion is located. The T piece is screwed to the wall and the shelf simply pushes onto it and is secured from below by two 'invisible' screws.

The picture below should show this in more detail.

[nathsea]

Those shelves look excellent....
A couple of questions if i may...

Where did you get the aluminium from?
How much weight will they hold, I`d want to be able to put my receiver on one?

Many Thanks

Nathan

[stroppygoblin]

Originally Posted by nathsea

Those shelves look excellent....
A couple of questions if i may...

Where did you get the aluminium from?
How much weight will they hold, I`d want to be able to put my receiver on one?

Many Thanks

Nathan

Nathan,
The shelves were made for me by my next door neighbor. He is a cabinet maker by trade and I belive the aluminium extrusions were 'obtained' from his company. I'll ask him if they are commercially available next time I see him - will let you know.

Weightwise the shelves are pretty robust. I have a fairly hefty Sony amp (STR-DE495, you might find some weight specs online somewhere) and it handles this with ease. Due to the location I have the shelves in, I am intending to add extra support by inserting a short metal rod into the shelf and the right hand wall, although this is purely a belt and braces measure as the shelves have been up for over 6 weeks without this and have no signs of drop.

I am extremely pleased with the quality of the shelves and they were made for a very reasonable £60 for the 4

[splnter]

Ok here is mine.. the start ...

To finish.

Just got to put cables under skirting.