[Taz69]

Hi all, well after having my plasma stuck on my wall for nearly 2 years, I have finally got around to start my home cinema/lounge.


Unfortunately due to my HD dying I have lost the pictures of what my lounge looked like beforehand but from the pictures you can get the general idea, firebreast in centre of wall with recess' either side one with a window.

I have built a frame around the firebreast to allow my 42PV500 to be sank in the wall with access for cables, also spaces for Left/Right and Centre speakers.

The lower picture shows how I hid the cables on my previous glass stand, Avebury from Argos, this no longer fits in the recess now, lol.

At this moment I am sorting the lighting out along with power for my new Screen which is covered by a lower ceiling, this has mulitple advantages as I had a major crack on the right had side of the ceiling which is now covered up. Great!

So hopefully you will enjoy the pictures. I am also trying to sort out my kit storage on the right hand side but yet to find something that actually feels right.

Thanks

Mark

[Taz69]

I thought it may be good to list my Kit aswell.

Panasonic 42PV500 wall mounted
Pioneer VSX-AX2VS
Panasonic DMR-EX75 HDMI
Maranzt DV4200 DVD, (to be changed for EP35 eventually)
Sky + box(not sure about SkyHD yet)
Xbox 360 and HD DVD addon via component.
Nintendo Wii

Panasonic AX200 due soon, ordered just need to collect it from Exeter.
102" Electric Screen from Ebay, £110 bargain.
Ikea Tretterion Blue behind TV
Ikea Dioder Colour LED x 2sets in recess, behind speakers etc.

Thats about it I think.

Mark

[Taz69]

Hi all, I have uploaded some recent pictures after installing the 1st set of lights from Ikea.

If anyone has any suggestions what to use in the recess for my kit, reply away.

Its different when I am doing this for my customers, like the wife says "it would have been done by now" lol, my answer "yeah but they are paying me" lol.

Mark

[Taz69]

Decisions Decisions,

Do I go for a 1:2 HDMI splitter and provide HDMI to both the Plasma and PJ or HDMI to PJ and Component to Plasma or vice versa, any suggestions.

Mark

[cybrey]

Originally Posted by Taz69

Decisions Decisions,

Do I go for a 1:2 HDMI splitter and provide HDMI to both the Plasma and PJ or HDMI to PJ and Component to Plasma or vice versa, any suggestions.

Mark

I was faced with this decision and decided to for a 3:2 HDMI matrix switch from Joe ( tmfsolutions). It cuts down on the number of the runs, although I have two to the PJ ( VGA and HDMI) and 3 (S-Video, HDMI and VGA) to the plasma.

Looking good so far, and your right about the wifes comment

PS If you watch sports, American Series ( Lost, 24 etc) or Movies ( This can be bypassed with a blu-ray / HDDVD drive) I definitely recommend getting SKY HD.

[Taz69]

Hi Cy, thanks for the comments,

My Pioneer amp does all my switching, at the moment I have HDMI going to my TV and did have a Mark Grant Component cable going to the old Projector.

I am looking at adding VGA to the PJ for future use, just not sure if to go for a matrix aswell or stick to HDMI & Component feeds even if I swap them around so the TV is on component.

Mark

[Taz69]

Right chaps, I now need to go for a 1:2 HDMI Splitter, not sure what I was thinking but how did I even think that an incoming HDMI signal would output via Component, lol.

So now looking for a good deal on a 1:2 splitter if anyone knows of one.

At the moment build has slowed down while I sort power for screen etc, need to sort out some sort of box for the Ikea LED lights aswell so they are tidy.

More Pictures soon, should be able to start some plastering tonight/tomorrow morning, then can put some colour on the wall, lovely Black I hope its lovely, my wife has took some convincing of this, lol.

Mark

[jstanton8869]

Mark,

All coming on well, looking forward to some photos of the AX-200 in action.

Can you post the id of the ebayer who sold you the screen?

Cheers

John

[Taz69]

Hi John, things have slowed down a little, will update tomorrow with some more pictures, got the screen mounted now, the false wall has been built, plastered then painted, then in came some work offers, being self employed I need to take the offer, lol.

The guy from ebay is called xenom-imports

Link is http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=004

HTH Mark

[Toxin]

Cant wait to see the finished build

[RICKYJ]

Any news on the finished room?

[Taz69]

Sorry guys and girls, still working on the room, (illness has delayed the issue, then getting back into work) cracking on with it now though so more updates soon.