[Boycie99]

I have just bought the 42" Panny PX70 and am looking to wall mount it... I want it as flush as possible to the wall as it is on the wall as you walk in the door to the lounge.

Could anyone point me in the right direction as to which wall mount sits the plasma closest to the wall

Cheers

Steve

[Blump]

i saw on another thread someone saves an inch or so by cutting a square section out of the plaster to fit the mount directly to the brick.

[jason g]

if its possible u could make a false front out of thin mdf attached to some wood batons and then u wouldnt need to make the mount flush to the wall just make the false front flush with the tv.
but if its too much to do then u should consider the above post.

[ManGina]

Boycie, can you let me know what you buy as I'm in the same position - Thanks

[Briggott]

http://www.vogels.com/detail.asp?ISS...D=80&PlineId=0
http://www.vogels.com/detail.asp?ISS...D=80&PlineId=0

http://www.bluestreamav.co.uk/pages/...?s=01119011573

You could try any of the above - I personally have the Partington that is about 1 inch thick.

Hope this helps.