AVForums.com is the UK's biggest & best home consumer electronics discussion resource New to AVForums.com? Start by reading our introduction here.


Go Back   AVForums.com > Home Cinema Construction and Configuration > Home Automation, Lighting, Security, Heating and Cooling

Reply
 
LinkBack Thread Tools Display Modes
Old 18-01-2008, 1:47 PM   #1 (permalink)
Member
Join Date: Mar 2004
Posts: 99
iTrader: (0)
Thanks: Gave 9, Got 3
Part P / Home Network

Hi,

Apologies if this is in the wrong section, I'm sure it must have been asked before but havn't been able to find anything similar using the search facility.

I've been granted planning permission for an extension and my neighbours are causing me some grief over it, they told the council that I've already started and I've removed the chimney breast etc.. Anyway, thats all untrue.

The council want to come and just check for themselves, so onto my question, the letter from the council mentions about all wiring should be Part P compilant. Everything is but I've recently just started wiring the house with cat5 and ct100 for a home network and to pipe tv around. I have a node0 in the garage where everyhing runs from. Does this kind of wiring fall under Part P ? I thought low voltage didn't ?

Is there anything else I should be concerned about ?

Any advice would be great.

Many Thanks,

Marvin
__________________
Panasonic PWD8, Yamaha RX-V757SE, Sony DVP-S725, Sky+, 3 Canton CD360F's LCR, Canton CD310F rears, SVS PB10-ISD
marvinwright1 is offline  
Reply With Quote
Old 18-01-2008, 4:31 PM   #2 (permalink)
Senior Member
 
Johnny Thunder's Avatar
Join Date: Dec 2004
Location: Middlesbrough
Posts: 1,452
iTrader: (40)
Thanks: Gave 206, Got 140
Re: Part P / Home Network

It doesn't mate.

Don't worry.
__________________
::Pioneer PDP 50MXE1::Lumagen VisionPro HDP::Denon AVR 3805::Arcam Diva DV79::Sky+HD::Microsoft XBOX 360::Acoustic Energy AELITE Three's, One's, Centre and Subwoofer::
Johnny Thunder is offline  
Reply With Quote
Thanks from:
marvinwright1 (18-01-2008)
Old 18-01-2008, 4:59 PM   #3 (permalink)
Member
Join Date: Mar 2004
Posts: 99
iTrader: (0)
Thanks: Gave 9, Got 3
Re: Part P / Home Network

great, thats a relief.
I didn't think it was but thought I better check.

Marvin.
__________________
Panasonic PWD8, Yamaha RX-V757SE, Sony DVP-S725, Sky+, 3 Canton CD360F's LCR, Canton CD310F rears, SVS PB10-ISD
marvinwright1 is offline  
Reply With Quote
Old 18-01-2008, 9:58 PM   #4 (permalink)
New Member
Join Date: Jan 2008
Posts: 21
iTrader: (0)
Thanks: Gave 1, Got 1
Re: Part P / Home Network

Marvin,

Just for your info, unless you are planning on putting a kitchen, bathroom or boiler in your extension then your wiring doesn't come under part p of the building regulations either.

All of your wiring will have to meet current wiring regs (16th or 17th edition) dependant on when you start the extension, but so long as you use a reliable contractor who is NICEIC registered you'll be fine.

Building control will require a test certificate when it's all finished, but they don't need to inspect it.

In fact if you get a decent building control officer (like the one we've got for doing my mates extension) there are only a certain number of visits required, display competence and they leave you alone.

Good luck with the build
Orfink69 is offline  
Reply With Quote
Old 18-01-2008, 10:22 PM   #5 (permalink)
Member
Join Date: Aug 2001
Posts: 233
iTrader: (1)
Thanks: Gave 2, Got 0
Re: Part P / Home Network

Quote:
Originally Posted by Orfink69 View Post
Marvin,

Just for your info, unless you are planning on putting a kitchen, bathroom or boiler in your extension then your wiring doesn't come under part p of the building regulations either.

All of your wiring will have to meet current wiring regs (16th or 17th edition) dependant on when you start the extension, but so long as you use a reliable contractor who is NICEIC registered you'll be fine.

Building control will require a test certificate when it's all finished, but they don't need to inspect it.

In fact if you get a decent building control officer (like the one we've got for doing my mates extension) there are only a certain number of visits required, display competence and they leave you alone.

Good luck with the build
It does not just have to be an NICEIC registerd person, saying that will get the back up of many..There are other and much better schemes such as Napit, Elecsa....If you use a contractor you just need to make sure he is part p registerd, that is all.
Alexg is offline  
Reply With Quote

Bookmarks

Tags
home, network, part


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP: Purchasing Part Of A Home Cinema Package Energy_C Speakers 5 19-12-2006 6:27 PM
Home Cinema Help - Part Deux cerbera1 Integrated AV Amplifiers and Receivers 3 05-09-2006 10:46 AM
For Sale: X-Box 360 games: Oblivion, Moto GP 06, or part-trade for wireless network adaptor Smurfin Archive : Completed Business and Expired Threads 11 13-07-2006 7:10 PM
Wireless video sender as part of home network - does such a gadget exist? moid Networking 6 26-11-2005 11:04 AM
KEF Cresta 2's part of home cinema setup? Jonathan Gray Speakers 3 26-11-2002 12:50 PM


All times are GMT. The time now is 4:10 PM.

AV ForumsOptimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2008 M2N E. & O. E.
Global Gold
Web Hosting