Guys, has anyone had any problems trying to 'learn' the IR codes from a Futronix P50 remote control onto their learning remote control?

I have tried every suggestion on remote central.com to try and learn the IR commands onto my Marantz RC1400 remote control but to no avail.

Any ideas?

[compolitus]

Hi

Can you get any of the commands to work?

Try just scene buttons 1, 2, 3, and Off and see if this works.

If the Marantz is a learning IR remote that can copy standard 38Khz remotes then it should work. Try Pressing the button on the Futronix remote just quickly once when you copy them do not hold the buttons down.

post a reply when you have tried.

good luck

Originally Posted by compolitus

Hi

Can you get any of the commands to work?

Try just scene buttons 1, 2, 3, and Off and see if this works.

If the Marantz is a learning IR remote that can copy standard 38Khz remotes then it should work. Try Pressing the button on the Futronix remote just quickly once when you copy them do not hold the buttons down.

post a reply when you have tried.

good luck

ALready tried this mate, no joy whatsoever. As soon as I press any button on the P50 remote, the Marantz just displays 'error' ! The strange thing is all my other remotes have been code grabbed successfully by the Marantz, it's just the Futronix that won't work.

[BruceH]

I have learnt the P100 codesl onto my RC9200. (Pronto)
if the ccf file is any use to you, you can get it at http://brucehartley.com/