 |
|
|
08-02-2002, 1:47 PM
|
#1 (permalink)
|
|
Member
Join Date: Oct 2001
Location: Shenfield
Posts: 157
Thanks: Gave 1, Got 4
|
Any downside in importing a Gamecube
I have never imported a console before, is there any downside in importing consoles?
I know you need the step down that comes with them but anything else ??
Any help appreciated or advice just to get one because I am missing so much !
|
|
|
08-02-2002, 3:15 PM
|
#2 (permalink)
|
|
Senior Member
Join Date: Dec 2001
Location: Northern Ireland
Posts: 1,563
Thanks: Gave 0, Got 0
|
I always buy Import consoles as, in the past, UK versions have been dreadful by comparison. For too long UK gamers didn't know what they where missing out on, content with playing games at 50hz and borders at the top and bottom of the screen.
Import consoles run faster and games are usually full-screen. I bought a JPN Gamecube upon release in September and did the US conversion as soon as the plans were released (simple solder job). I can now play JPN and US region games at the flick of a switch. Obviously I cannot play UK games but why would I want to? One annoying thing about the import Gamecube though is that it has no RGB out so you will have to make do with S-Video. Alternatively you can get a 480p signal using component/VGA if you have the suitable equipment (in which case definately go for an import).
So there are really only 2 drawbacks to importing:
1. Do you want to be able to play UK Games?
2. NO RGB out. (although a conversion is in the works).
The UK Gamecube will retail for a very reasonable £150 and will apparantly support RGB out as standard. Though it is still unclear whether a 60hz full screen full speed option will be included. This may inevitably come down to developer support for PAL optimised games. Therefore, for me, UK gaming is still not worth the risk and I would still go down the import route.
If you have any more specific questions about the import gamecube or where to buy, I will be more than happy to answer them.
__________________
Paul
|
|
|
09-02-2002, 11:50 AM
|
#3 (permalink)
|
|
Member
Join Date: Oct 2001
Location: Shenfield
Posts: 157
Thanks: Gave 1, Got 4
|
Cheers Groundy for your reply, thnaks for the comments.
I have decided go for an import and can't wait now to get it.
One more question is there any way of just importing games yourself from the internet without customs issues? Any good sites ? or do you have to pay about the £50/£60 quid mark for each game.
Cheers for the advice again.
|
|
|
09-02-2002, 12:44 PM
|
#4 (permalink)
|
|
Senior Member
Join Date: Jan 2002
Location: EU
Posts: 1,378
Thanks: Gave 134, Got 52
|
The customs issues are the pits. Peolple should be allowed to buy goods from wherever they want. I think the EU and Euro will break down a few barriers in Europe, but there still seems a big divide between America and Europe.
Boring old me is going to play safe and wait until May 3 to avoid complications. I'm skint now anyway so it's a bit academic!
RDB
|
|
|
09-02-2002, 10:32 PM
|
#5 (permalink)
|
|
Senior Member
Join Date: Dec 2001
Location: Northern Ireland
Posts: 1,563
Thanks: Gave 0, Got 0
|
Jules:
You can order games of the net with no problems whatsoever. You don't usually get hit for customs charges - in fact I never have on games. The three main import outlets I order from are:
http://www.dvdboxoffice.com - (Very slow but cheap, £25-£32)
http://www.cduniverse.com - (Fast, reliable, £40-£45)
http://www.tronixweb.com - (Fast, helpful, £40-£50)
I assume you know where you are getting your import Gamcube but if not, try:
http://www.lik-sang.com
or
http://www.yesasia.com
Make sure you purchase a JAP/USA modified unit so you can play JPN and USA games. Alternatively, you can get the conversion done at a later date (by me if you like).
One last thing, make sure your TV can handle an NTSC 3.58 Mhz signal.
Thanks.
__________________
Paul
|
|
|
10-02-2002, 2:24 PM
|
#6 (permalink)
|
|
Member
Join Date: Oct 2001
Location: Shenfield
Posts: 157
Thanks: Gave 1, Got 4
|
Thanks again groundy for the links for software. I have purchased my gamecube from lik sang. I must say very imprssed with them so far, quick service nice little e-mails to keep you in touch. Shouldn't be long till its hear now hopefully!!
I have ordered one that can play US and Jap games but to be honest I don't see myself playing a lot of Jap imports, you surely can't understand what is going on in some of the more intricate games can you ? I assume they are all in Japanese??
Call me stupid but the enjoyment must be lost?
|
|
|
10-02-2002, 3:25 PM
|
#7 (permalink)
|
|
Guest
|
Step down convertors....
Do the USA cubes need a step down convertor, and if so, where do you get them from?
|
|
|
|
10-02-2002, 5:50 PM
|
#8 (permalink)
|
|
Member
Join Date: Oct 2001
Location: Shenfield
Posts: 157
Thanks: Gave 1, Got 4
|
grounder
When ordering games do you ask for any special actions to be taken by any of these guys or do you not need to ?
|
|
|
10-02-2002, 6:00 PM
|
#9 (permalink)
|
|
Senior Member
Join Date: Dec 2001
Location: Northern Ireland
Posts: 1,563
Thanks: Gave 0, Got 0
|
You don't need to ask for any special labels etc. DVDBoxOffice and CDUniverse ship the games the same way as their DVD's. Tronix are very accomodating in this area also and will gladly mark down the value of the games if you are ordering more than 1, although this is really only a concern if you use the FEDEX shipping method. The standard USPS service comes via regular post in the UK and you should have no worries about extra costs this way.
__________________
Paul
|
|
|
11-02-2002, 8:38 AM
|
#10 (permalink)
|
|
Member
Join Date: Oct 2001
Location: Shenfield
Posts: 157
Thanks: Gave 1, Got 4
|
Groundy
thanks again for your help I took your advice and tried cduniverse last night.
It shouldn't be long now for the cube, can't wait!
Thanks for all your help in this much appreciated.
|
|
|
11-02-2002, 6:10 PM
|
#11 (permalink)
|
|
Guest
|
component/VGA GAmecube?
You wrote:
Alternatively you can get a 480p signal using component/VGA if you have the suitable equipment (in which case definately go for an import).
Can you explain more here. I have Sony 44p2s projection TV. WHat connections are you talking here? Let me know... I would like better picture
|
|
|
|
11-02-2002, 9:59 PM
|
#12 (permalink)
|
|
Member
Join Date: Jun 2001
Location: UK
Posts: 163
Thanks: Gave 0, Got 0
|
u require a component cable that plugs into the digital out of the gamecube, which u then plug into the component input on your tv/projector
|
|
|
11-02-2002, 11:43 PM
|
#13 (permalink)
|
|
Senior Member
Join Date: Dec 2001
Location: Northern Ireland
Posts: 1,563
Thanks: Gave 0, Got 0
|
To get a 480p signal, you require either the Component Video cable or the D-Terminal Digital Video Cable. Your Sony may or may not have Component inputs - look for 3 phono terminals coloured Red/Green/Blue. If it does have them, you're in luck and you will get a significantly improved and more stable image than standard S-Video.
__________________
Paul
|
|
|
12-02-2002, 11:06 AM
|
#14 (permalink)
|
|
Guest
|
ok
on the front of my TV is a little flap, in there is 3 phono sockets.
The current cable I have is 3 phono sockets plugged into a SCART adapter which goes in the back of my television?
I did have it plugged into that but then i thought it was tidier to put it into the scart at the back?
2) Is there a batter wire around than the one I have (stolen off my N64). Its not exactly fat and exepnsive looking hehe
|
|
|
|
12-02-2002, 7:45 PM
|
#15 (permalink)
|
|
Member
Join Date: Jun 2001
Location: UK
Posts: 163
Thanks: Gave 0, Got 0
|
I assume the lead u previously used for your n64 was a COMPOSITE lead, (consisting of one red, one white, for sound and one yellow phono plug, for video), that u plugged into the front of your tv. as mentioned by groundy, u r looking for 3 phono inputs coloured red, green and blue. if u don't have this, the best picture u will probably get is via a s video lead.
|
|
|
| |