Selling off all the old kit out of my boot as I've got a nice little install coming along. All working fine up until removing them today - speakers are about 10 months old and the amp & enclosures are about 6 months old.
Speakers - Kenwood 6x9s - £25 + P&P
* 4-way 4-speaker System
* 6"x 9" Injection P.P. Cone Woofer
* 70 mm Water Resistant Cone
* 20 mm P.E.T. Balanced Dome Tweeter x 2 / Image Enhancer
* Peak Power - 400 W
* Maximum Input Power - 160 W
* Rated Input Power - 80 W
* Sensitivity - 93 dB
* Voice coil - 4 Ohm
* Frequency response - 28 ~ 30.000 Hz
* caraudiosecurity.com
* Cross-over frequency - 4 kHz
* Mounting depth - 77 mm
* Size - 257 x 186 x 112 mm
Amp - Fusion fp-402 - £30 + P&P
Product Specifications
Bandwidth 10Hz - 40kHz
Signal to Noise >:95dB
Fuse Rating 1 x 25A
Separation >:60dB
Input Sensitivity 300mV-8V
LP Variable Crossover 40 Hz - 160Hz @ 12 dB / octave
HP Variable Crossover 40 Hz - 600Hz @ 12 dB / octave
Variable Bass Boost 0dB + - 18dB Gain @ 45 Hz
Variable Sub Sonic Filter 20 Hz - 55Hz @ 18dB / octave
Input Impedance 20K
Damping Factor >:200
T.H.D 0.05%
Dimensions D 57.5mm L 260mm H 220mm
CEA 2006 Compliant Amplifier Ratings
12.6 Volt Power Output Specifications
50 WRMS per Channel @ 4 Ohms and 1% THD+N
96 WRMS per Channel @ 2 Ohms and 1% THD+N
160 WRMS Bridged Channels @ 4 Ohms and 1% THD+N
14.4 Volt Power Output Specifications
66 WRMS per Channel @ 4 Ohms and 1% THD+N
100 WRMS per Channel @ 2 Ohms and 1% THD+N
200 WRMS Bridged Channels @ 4 Ohms and 1% THD+N
And last but not least - A pair of 6x9 Speaker Enclosures - £15 + P&P
Features:
* Trimmed with black carpet
* Constructed using 12mm MDF board
* Sealed chamber design
* For two matching 6”x9” speakers
* Push tab terminals
* Internally pre-wired
* Approx 0.32 ft³ volume each
Payment to be made via Paypal Gift or + fees and if posting, items will have to be shipped via courier due to size and I'm happy for you to arrange your own if you would prefer. Collection also available from Leicester.
Any questions, feel free to ask and I'll upload some pictures tomorrow. All items are boxed with instructions apart from the enclosures.
Cheers
Matt
Location: Leicester
I have read the trading rules and agree to abide by them at all times until the transaction is concluded to the satisfaction of all parties involved : Yes.
--------------------------------------------------
This message is automatically inserted in all classifieds forum threads.
By replying to this thread you agree to abide by the trading rules detailed here.
Please be advised, all buyers and sellers should satisfy themselves that the other party is genuine by providing the following via PM to each other after negotiations are complete and prior to dispatching goods and making payment:
1) Landline telephone number. Make a call to check out the area code and number are correct too!
2) Name and address including postcode
3) Valid e-mail address (no disposable addresses such as @gmail or @yahoo for example).
DO NOT proceed with a deal until you are completely satisfied with all details being correct. It's in your best interest to check out these details yourself.
Also we advise that the vendor post images of the items for sale. This helps your sale by showing the condition of the goods prior to dispatch.
Linear Mode
