| Re: 580EX MKII - Strobe setting?
I interpreted the OPs question as being about the multiple flash function on the 580EXII rather than the use of the DOF preview button to activate the modelling light. I could well be wrong though. I guess it doesn't really matter though as the 580EXII can do both.
It's been a while since I had a very quick play with the "multi" function on the 580EXII, but you can set the frequency of the strobe so when you open the shutter the flash fires multiple times at that rate.
Cheers.
Edit: to active the strobe function on the 580EXII you hit the mode button which cycles through ETTL, Manual and Multi. Multi is the one you want. You can then set the number of Hz you want.
To activate the modelling light function on both the 430EX and 580EXII, you hit the DOF button on the camera - this stops the aperture of the lens down (in the same was as when you're not using flash) to whatever you've set it to and fires the flash continuously at a high rate for a second to give you a moment to look at what affect the strobe is having on the subject at that aperture.
Cheers.
Last edited by ksten; 10-01-2008 at 12:24 PM.
|