| Re: Sony HC39 E - Flip Out Screen Dead!
Hi
No, sorry. I never did receive any help on this one. I did a little searching around on the net, and found that this is a known issue with that particular model of camera. I noticed a fair few posts about it.
I was informed by one source that the issue lies with the ribbon cable connecting the screen to the main circuit board, and that the opening and closing of the screen put extra pressure on an already faulty cable.
My camera was fine one minute, then a few lines started to "streak' across the screen, then the whole screen seemed to have a brown/red cast to it, then it died.
I did take the screen housing and one side of the camera body off in order to see if wiggling the cable made the screen flicker on, but nothing. In fact it ended up with the camcorder not working at all, so I would not recommend doing this. In the end the camera ended up in the bin and I had to buy another.
I know this is not the answer you wanted...and it is not my preferred answer to give, but you either have to pay for a repair, or cut your losses.
Philip
__________________
SIP
|