[maxpower]

Is there anyway I can connect my Camera to a TV via a video sender. Reason I wish to use it to monitor (not record) an amateur drama production. I know I can do it using hard wire but distance and the laying of cables is a problem. I have a couple of digi senders but I cant see how I can connect the output of the camera without going thru recorder or the like. Is it possible, has anyone done it?

[MarkE19]

Not done it, but see no reason why you can't!
Most camcorders have a dedicated cable for the AV output - small jack or din type plug to yellow, red & white phono plugs. Just connect this to the senders composite video & stereo audio inputs and away you go. If the sender only has a scart input then just use a phono to scart adapter, just make sure it is an adapter wired for phono>scart direction rather than scart>phono as they are directional!

Mark.

[maxpower]

Thanks for reply, the problem I have is that the sender does not have the inputs you make reference to. The sender input is via a scart plug (not socket) which normally goes into the output socket on back of recorder/Sky box or whatever. There are no phono sockets on the sender either. I could use a phono to scart adaptor but again they are of the wrong gender. The only way I can see at the moment would be to connect it to VCR and then use it as a thru port. But I wish to mount the camera up high on a wall and there is no place nearby for the recorder. Hence the need to use wireless.

[MarkE19]

I now see where you are coming from!

Right, the way I see it is you have 2 choices:

1. get another video sender that does have phono inputs.
2. Get one of These to connect the video sender and scart adaptor on camcorder lead, but this is getting a bit messy with all the connections.

Mark.

[maxpower]

Mark, thanks for the info, i've order one of those adaptors, should do the trick
Regards
Dave M

[maxpower]

Thanx mark, all sorted.
Regards
Dave M

[MarkE19]