[TeamGers]

Hi guys, i'm sure i'm just being a thick sod here, but here goes, i've set up the above DVD player on an LG LCD tv via HDMI connection, i'm getting a picture but no frigging sound.... i've gone into the DVD player set up menu and when i try to select digital output on the sound menu i cant seem to change it from OFF to ON, its driving me friggin nuts, lol, can anyone please tell me what to do to get sound from this bloody DVD player,,,,,,,,,,,,,,,

[TeamGers]

Just realised ( but still may be wrong ), but am i selecting the wrong output mode for sound?



Thanks again......

[ma1234]

Hopefully something here that may help.

http://www.p4c.philips.com/cgi-bin/d...hlt=Link_FAQs#

There should also be asetting to turn HDMI audio to on which outputs sound via the HDMI cable.

[TeamGers]

Thanks for that, but i've discovered that when i use a scart cable i get sound, so it appears although i get a picture using an HDMI lead i don't get any sound is this due to some compatability issue between the TV ( its a 26" LG ) and the DVD palyer?
I would still like to be able to connect via the HDMI cable for obvious reasons, so if anyone knows a way around this problem i'd be much obliged.



Thanks again.

[TeamGers]

[Peopleselbowpad]

Try changing HDMI Audio to PCM. Make sure HDMI is the only connection attached, the Phillips has a Intelli Menu and knows what is connected.

I had the same problem with mine. Audio worked fine with scart but when i connected the HDMI lead i got no sound from the TV. There is a setting in there in the DVD menu to turn on sound with HDMI. For some reason HDMI sound on default is off and you have to change it. I understand though you cannot connect the DVD player to a surround sound system via the coax output if you already have the hdmi connection in use???

[TeamGers]

Originally Posted by Peopleselbowpad

Try changing HDMI Audio to PCM. Make sure HDMI is the only connection attached, the Phillips has a Intelli Menu and knows what is connected.

Thanks, done that mate, but still no luck, i think i need to download and install the latest firmware.



Thanks.

[insx]

Originally Posted by fingers mcginty

I understand though you cannot connect the DVD player to a surround sound system via the coax output if you already have the hdmi connection in use???

You can have HDMI video and coax audio at the same time. You can't have audio output via HDMI and coax at the same time.

Cheers
insx