Onkyo Main Firmware and DSP Updates

Donali · 24-09-2010, 6:39 PM

Quote:

Originally Posted by TomLeeChan

I checked the the FW of receiver and said 1.04, but then I connected rs232 cable with laptop and receiver, hold "enter" button and turned on the receiver, but then said, it is 1.01 version. What is then???

IIRC this is the loader version. Follow the instructions in the file you downloaded and you should be OK.

TomLeeChan · 24-09-2010, 7:03 PM

Well I press "display" and "standby" it says 1.04, but if I hold "enter" and turn on the receiver it says that I have 1.01 ...

Anyway I tried to install HDMI 1.02 and when I pressed "video update" is says: Run-time error 8002: invalid port number ... *** LOL???

Am I missing something?

Donali · 24-09-2010, 7:06 PM

1.04 is your firmware, 1.01 is your loader version.

Have you set the com port to Com 1?

TomLeeChan · 24-09-2010, 7:18 PM

yes, speed 9600 (didnt change it)

I connected the cable, press only once tuning up button, turn on, nothing happened

Donali · 24-09-2010, 7:28 PM

I'm at a loss now but I'm sure its just a communication error. Did you set the COM 1 vis device manager on your PC?

namuk · 24-09-2010, 7:30 PM

Quote:

Originally Posted by TomLeeChan

I checked the the FW of receiver and said 1.04, but then I connected rs232 cable with laptop and receiver, hold "enter" button and turned on the receiver, but then said, it is 1.01 version. What is then???

edit: I wanted to install 1.04 then, but it said invalid port 8002 (something like that).
Then I decided to install 1.07, I press "tuning up" button, turned on the receiver ... NO “Main Update mode” appeared on display ... what to do?

did it say this "MainUpdate Mode Ver.1.01/07615L" then your ok , it is just the version of the Amp updater..
i also uploaded this Update instructions (Pdf format) if you do not have this version? RapidShare: 1-CLICK Web hosting - Easy Filehosting

also the firmware has tobe in the same Directory as the updater , make a new folder and name iT "Firmware" and place all files in there.

TomLeeChan · 24-09-2010, 9:37 PM

i am definitely doing something wrong because everytime pops out that error ... and yeah i got it set on com1 ...

i don't know, i gave up, i'll just let it be on 1.04 ... at least i updated sdp ...

carlosalberto · 19-10-2010, 10:44 PM

I have an Onkyo TX-SR875, with firmware 1.01
I find the necessary updates, I have the instructions
Tank you

Carlos

Sammer · 12-12-2010, 1:24 PM

I have an Onkyo 603 from over 4 years ago....

I have never done any updates...

is it worth doing it?

keyser · 20-03-2013, 7:44 PM

Has anyone done a update and the video output has stopped working? I have yet to isolate what parts of it don't work though.
I´m thinking of going through the whole update proccess again.. what happens if one tries to install a firmware that is already installed?

dUnKle · 06-04-2013, 12:18 PM

My firmware is 1.05

My amp has recently been loosing its settings
Each speaker reverts back to 0 with exception of sub which usually shows a figure so long it does not appear on screen

I'm also unable to save settings getting message saying store failed

Can this be fixed ?

19-10-2010, 10:44 PM	#698
carlosalberto New Member Join Date: Oct 2010 Thanks: Gave 0, Got 0 Posts: 1	help ..Onkyo TX-SR875 (firmware 1.01) I need to update I have an Onkyo TX-SR875, with firmware 1.01 I find the necessary updates, I have the instructions Tank you Carlos
	Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

24-09-2010, 7:03 PM	#692
TomLeeChan Member Join Date: Sep 2010 Thanks: Gave 18, Got 0 Posts: 30	Well I press "display" and "standby" it says 1.04, but if I hold "enter" and turn on the receiver it says that I have 1.01 ... Anyway I tried to install HDMI 1.02 and when I pressed "video update" is says: Run-time error 8002: invalid port number ... *** LOL??? Am I missing something?
	Quote

24-09-2010, 7:06 PM	#693
Donali Senior Member Join Date: Jan 2005 Location: Ellon Thanks: Gave 12, Got 85 Posts: 1,558	1.04 is your firmware, 1.01 is your loader version. Have you set the com port to Com 1?
	Quote

24-09-2010, 7:18 PM	#694
TomLeeChan Member Join Date: Sep 2010 Thanks: Gave 18, Got 0 Posts: 30	yes, speed 9600 (didnt change it) I connected the cable, press only once tuning up button, turn on, nothing happened
	Quote

24-09-2010, 7:28 PM	#695
Donali Senior Member Join Date: Jan 2005 Location: Ellon Thanks: Gave 12, Got 85 Posts: 1,558	I'm at a loss now but I'm sure its just a communication error. Did you set the COM 1 vis device manager on your PC?
	Quote

24-09-2010, 9:37 PM	#697
TomLeeChan Member Join Date: Sep 2010 Thanks: Gave 18, Got 0 Posts: 30	i am definitely doing something wrong because everytime pops out that error ... and yeah i got it set on com1 ... i don't know, i gave up, i'll just let it be on 1.04 ... at least i updated sdp ...
	Quote

12-12-2010, 1:24 PM	#699
Sammer Member Join Date: Oct 2005 Thanks: Gave 0, Got 0 Posts: 123	I have an Onkyo 603 from over 4 years ago.... I have never done any updates... is it worth doing it?
	Quote

20-03-2013, 7:44 PM	#700
keyser Member Join Date: Jul 2000 Location: gardabaer, Iceland Thanks: Gave 4, Got 1 Posts: 881	Has anyone done a update and the video output has stopped working? I have yet to isolate what parts of it don't work though. I´m thinking of going through the whole update proccess again.. what happens if one tries to install a firmware that is already installed?
	Quote

06-04-2013, 12:18 PM	#701
dUnKle Conspicuous Member Join Date: Jan 2001 Blog Entries: 1 Thanks: Gave 493, Got 248 Posts: 8,979	My firmware is 1.05 My amp has recently been loosing its settings Each speaker reverts back to 0 with exception of sub which usually shows a figure so long it does not appear on screen I'm also unable to save settings getting message saying store failed Can this be fixed ?
	Quote

Member Log In

Not a Member Yet?

Onkyo Main Firmware and DSP Updates