AVForums.com is the UK's biggest & best home consumer electronics discussion resource New to AVForums.com? Start by reading our introduction here.


Go Back   AVForums.com > Video Electronics > CRT Televisions

Reply
 
LinkBack Thread Tools Display Modes
Old 13-02-2003, 6:44 PM   #1 (permalink)
Member
Join Date: Nov 2002
Location: Leeds
Posts: 304
iTrader: (1)
Thanks: Gave 36, Got 2
sony 36FS70

I have a Sony FS70 which offers the following aspect ratios: 16:9, Zoom, 14:9, 4:3 and Smart.

When watching TV (DVD seems to be OK), whether I set it to autodetect the correct aspect ratio or not, it keeps flicking between different options, eg from 14:9 to Zoom and back again.

Sometimes 14:9 produces the 2 bars down left and right whilst giving a full height picture (which it should), other times it will add bars top and bottom as well, meaning the overall picture size is reduced. Sometimes the whole picture will then move up the screen leaving no bar at the top but a very thick bar at the bottom. I have similar problems if I use Zoom or Smart settings. 4:3 seems to be OK.

Are these faults of the TV or just something I must live with if I want anything other than 4:3 (which seems to work OK)? I'm new to widescreen so have no experience of this.

I watch 99% of my Tivo via a Tivo (ie a recording) and this is where I see the problem. Other equipment connected includes a NTL digital STB D1010, Philips 890DVDR and VCR plus Sony HTSL5a home cinema.

Any help welcome
__________________
Eric
Cinema Room:- Marantz SR8001, JVC HD1 w/ Stewart 100" Grayhawk screen, M&K 850 LCR, 4 x Def Tech BP/A in-ceiling surrounds, SVS PB13 Ultra, Xbox 360 Elite, PS3.
childe is offline  
Reply With Quote
Old 14-02-2003, 12:06 AM   #2 (permalink)
Dave20
Guest
Posts: n/a
my fs 76 adjusts the picture all the time (wide - zoom) when flicking through cable channels.. it was annoying at first, but got used to it now. its good in the way that the picture is never the wrong shape.. but the skyone symbol goes off the screen alot. DVD is fine and stays on what it is set too which is the main thing
 
Reply With Quote
Old 14-02-2003, 12:08 AM   #3 (permalink)
Lpool
Guest
Posts: n/a
Quote:
Originally posted by Dave20
my fs 76 adjusts the picture all the time (wide - zoom) when flicking through cable channels.. it was annoying at first, but got used to it now. its good in the way that the picture is never the wrong shape.. but the skyone symbol goes off the screen alot. DVD is fine and stays on what it is set too which is the main thing
Isn't because you have it on "smart" ?
 
Reply With Quote
Old 15-02-2003, 2:32 PM   #4 (permalink)
Dave20
Guest
Posts: n/a
no, i never have it on smart , but it seems to end up there somehow.. i always set it to wide ALWAYS, its fine on dvd, but on cable it changes on its own.. maybe i have gremlins?!?!!?
 
Reply With Quote
Old 17-02-2003, 2:09 PM   #5 (permalink)
Member
Join Date: Nov 2002
Location: Leeds
Posts: 304
iTrader: (1)
Thanks: Gave 36, Got 2
I posted this problem on Digital Spy, and got an answer which seems to work.

See http://forum.digitalspy.co.uk/board/t/51894/ds.html.

Your answer may be to look under the AV settings menu. It seems to have worked for me.

Good luck
__________________
Eric
Cinema Room:- Marantz SR8001, JVC HD1 w/ Stewart 100" Grayhawk screen, M&K 850 LCR, 4 x Def Tech BP/A in-ceiling surrounds, SVS PB13 Ultra, Xbox 360 Elite, PS3.
childe is offline  
Reply With Quote

Bookmarks

Tags
36fs70, sony


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 4:31 AM.

AV ForumsOptimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2008 M2N E. & O. E.
Global Gold
Web Hosting