Deep nontilt/swivel bracket needed

[mantaman]

Just finished a "floating wall" type set up and need to now mount a 50" Panasonic plasma (50PZ70). Unlike most, who want as slim a bracket profile as possible, I need to achieve a depth off the back mounting wall of 20-30+ cms so the front of the screen aligns with the surround I have made for it.

Can't/don't want to stretch to £000s for a tilting/swiveling bracket, and wondered what was the deepest non adjustable bracket available? Must be able to mount TV from the front (as opposed to sliding in from the side or top). I will probably need to pad out a bit with a wood frame, but the deeper the bracket, the better.

Thanks and regards

Mm

[QuackingPlums]

This one looks pretty deep but I can't tell if it is mountable from the front.

A friend of mine fit a floating wall recently and had to resort to a scissor action mount to get the TV to fit in the hole he'd made, which allowed him to secure the TV to the mount before sliding it gently into place.
He also chose a panel with a slim bezel that would overlap the wall, avoiding the thin gap that sometimes is left between the wall and the TV when you mount in this way. His TV only stands proud of the wall by a few mm but unfortunately the design of the Panny isn't that great for doing this, as the bezel is quite deep.

[mantaman]

Thanks for the link. Hadn't seen it and will investigate further. Cheers.