Unicol PLX bracket

haf63 · 27-11-2007, 3:23 PM

I am looking to embed my bracket into a cavity wall so that my 50" plasma will be touching the wall on install to get a closet-to-flush finish. As far as i can work out the unicol plx is the slimmest bracket around at 2cm-ish but i can't seem to find the dimensions for the 2 panels that make it up, in order to calculate size of plaster i have to cut out. I've emailed unicol and searched the web but no luck so far.
Anyone know?

Darren Coates · 05-12-2007, 2:37 PM

Hi,

What are you trying to do - can you give me an idea? I'd expect most people would attach the backplate to the wall, and then put up with the 2cm gap. Obviously this is an issue?

The PLX can be made to measure or supplied as a universal version, so the plate on the back of the TV varies. We get them shipped direct from Unicol, so I've no idea on the size. We can push them for the info, if you would like, but they are very difficult to get info like this, I'm afraid.

I don't know whether you read the instructions - no dimensions, but they are here: http://www.unicol.co.uk/pdf/plxinst.pdf.

Hope that helps!

27-11-2007, 3:23 PM	#1 (permalink)
haf63 Member Join Date: Jun 2005 Posts: 177 My movie collection iTrader: (1) Thanks: Gave 10, Got 3	Unicol PLX bracket I am looking to embed my bracket into a cavity wall so that my 50" plasma will be touching the wall on install to get a closet-to-flush finish. As far as i can work out the unicol plx is the slimmest bracket around at 2cm-ish but i can't seem to find the dimensions for the 2 panels that make it up, in order to calculate size of plaster i have to cut out. I've emailed unicol and searched the web but no luck so far. Anyone know?

05-12-2007, 2:37 PM	#2 (permalink)
Darren Coates Assured Advertiser Join Date: Sep 2005 Posts: 13 My movie collection iTrader: (0) Thanks: Gave 0, Got 2	Re: Unicol PLX bracket Hi, What are you trying to do - can you give me an idea? I'd expect most people would attach the backplate to the wall, and then put up with the 2cm gap. Obviously this is an issue? The PLX can be made to measure or supplied as a universal version, so the plate on the back of the TV varies. We get them shipped direct from Unicol, so I've no idea on the size. We can push them for the info, if you would like, but they are very difficult to get info like this, I'm afraid. I don't know whether you read the instructions - no dimensions, but they are here: http://www.unicol.co.uk/pdf/plxinst.pdf. Hope that helps! __________________ Darren Coates, Managing Director - 01473 279992 Chase AV Direct - Plasma and LCD Stands, Brackets and Mounts from Alphason - Atacama - Audinni - Blok - Optimum - Quadraspire - Sona - Soundstyle - Spectral - Unicol - Vogels Proud to be an AVForums Assured Advertiser

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does anyone have fitting instructions for a unicol bracket	strees	Plasma Brackets and Mounts	0	20-01-2006 8:33 PM
Unicol Bracket stockists ??	Darbyweb	Plasma Brackets and Mounts	4	17-04-2003 2:23 PM
Sanyo PLV-Z1 and Unicol bracket	Harps	DLP, LCD and D-ILA Projectors	3	25-03-2003 5:52 PM
anyone need a unicol wall bracket	jmack	Plasma Brackets and Mounts	1	21-02-2003 6:19 PM
Unicol wall bracket	Lennyz	Plasma Brackets and Mounts	1	08-11-2002 11:55 PM


AVForums.com is the UK's biggest & best home consumer electronics discussion resource	New to AVForums.com? Start by reading our introduction here.
Search AVForums.com