AVForums.com is the UK's biggest & best home consumer electronics discussion resource New to AVForums.com? Start by reading our introduction here.


Go Back   AVForums.com > Audio Electronics > Subwoofers

Reply
 
LinkBack Thread Tools Display Modes
Old 18-08-2002, 11:06 AM   #1 (permalink)
Ex Member
 
mcmullanbrush's Avatar
Join Date: Apr 2002
Location: rotherham
Posts: 1,146
iTrader: (9)
Thanks: Gave 0, Got 0
Downward firing sub

I have been using a downward firing sub and it has been causing my living room to vibrate.
I previously used a much more powerful forward firing sub without any such trouble.
The sub is sitting on wooden floorboards, is there anything I can do to isolate it. Would sticking blue tack underneath it help
mcmullanbrush is offline  
Reply With Quote
Old 18-08-2002, 12:20 PM   #2 (permalink)
Guest
Posts: n/a
First things first: fix yer floorboards !!! If you've got loosies screw 'em down tight.

A complex solution is to have a heavy mounting beneath the floor, with appropriate holes in your floorboards, and your sub 'sitting' on the mounting, rather than your room. This, in effect, decouples your sub from the entire house.

If that's too elaborate, try a big peice of granite, marble, even a paving stone on blu-tak sheets or halved rubber squash balls and have the sub on top sitting on spikes. Er, or something.

HTH,
Mike.
 
Reply With Quote
Old 18-08-2002, 1:32 PM   #3 (permalink)
Mad Hatter
Guest
Posts: n/a
Quote:
Originally posted by Flimber
have the sub on top sitting on spikes.
Spikes couple the sub to the floor. Try without if the sub has rubber feet.
 
Reply With Quote
Old 18-08-2002, 1:52 PM   #4 (permalink)
Ex Member
Join Date: Apr 2001
Location: Belfast
Posts: 6,075
iTrader: (27)
Thanks: Gave 0, Got 0
Paving slab sitting on halved squash balls then the sub sitting on lumps of blue tach on top of the slab. I reckon that the presence of the squash balls and blue tack, the arrangement should not only be reasonably decoupled but would also be less prone to itself resonating in response to the room.....Isnt it wonderful the idea physics brings to me!

ad
buns is offline  
Reply With Quote
Old 18-08-2002, 1:55 PM   #5 (permalink)
Assured Advertiser
 
Dan Gleebles's Avatar
Join Date: Aug 2002
Location: Essex
Posts: 356
iTrader: (1)
Thanks: Gave 2, Got 12
If you can sit it on something solid thats damped, ie a paving slab sitting on a bed of sand this will help, impossible I know but your not only vibrating your floor boards but you now have a coupled cavity under the floor. It may just need the paving slab, it's fun experimenting time.

Please excuse the spelling i'm drunk
__________________
Smoke me a kipper i'll be back for breakfast
Tech Manager at B.K. Electronics

Assured Advertiser.
Dan Gleebles is offline  
Reply With Quote
Old 18-08-2002, 2:18 PM   #6 (permalink)
Ex Member
 
mcmullanbrush's Avatar
Join Date: Apr 2002
Location: rotherham
Posts: 1,146
iTrader: (9)
Thanks: Gave 0, Got 0
Quote:
Originally posted by Dan Gleebles

Please excuse the spelling i'm drunk
I admire your style

Thanks everyone, I will experiment a bit
mcmullanbrush is offline  
Reply With Quote
Old 18-08-2002, 2:27 PM   #7 (permalink)
Member
Join Date: Apr 2002
Location: Leeds, England
Posts: 284
iTrader: (0)
Thanks: Gave 0, Got 0
Try squash balls filled with silicone sealant underneath concrete slabs underneath spikes... worked for me.
john87 is offline  
Reply With Quote
Old 18-08-2002, 4:20 PM   #8 (permalink)
Sean O'Squirrel
Guest
Posts: n/a
Mr Brush,

As a matter of interest, what kind of sub do you have as it seems only a few days ago that you had one of Chip's favourite fire hazards.
 
Reply With Quote
Old 18-08-2002, 5:13 PM   #9 (permalink)
Ex Member
 
mcmullanbrush's Avatar
Join Date: Apr 2002
Location: rotherham
Posts: 1,146
iTrader: (9)
Thanks: Gave 0, Got 0
Seano hello

I own a Paradigm servo-15 and a Yamaha yst sw800.

They didnt blend very well so my plan was to sell both and buy 2 subs of the same make and model.

Unfortunately, I had no interest in the Yamaha, so I have agreed a sale on the Paradigm and I am now trying to set up the Yamaha to provide the required bass on its own.

This is why I discovered the problem.

I can attest that after 30 months of ownership the Paradigm did not cause a single house fire or death.
mcmullanbrush is offline  
Reply With Quote
Old 19-08-2002, 11:11 AM   #10 (permalink)
Guest
Posts: n/a
Quote:
Originally posted by Mad Hatter


Spikes couple the sub to the floor.
Whilst this is a debatable point, I think you misread/misunderstood what I wrote anyway.
Mike.
 
Reply With Quote

Bookmarks

Tags
downward, firing


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT. The time now is 7:48 PM.

AV ForumsOptimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2008 M2N E. & O. E.
Global Gold
Web Hosting