3 Finger fred sort pj bracket out

[AV nutter]

Hi guys after a good talk with Chris Frost today once again Chris words of wisdom won the day ty Chris

Im now looking at seeing my mate fred to build me another bracket that will fit new PJ so as i can bolt to my back wall and hang there just right

The bracket will look like an L shape ladder the 2 bits of 2ft with 19inches in between bolted onto back wall then welded to that 30.36inch of uni strut with the same 19inches in between welded from the front bit of uni strut going up to the top bit bolted to wall a bit either side so it looks like a double sided a frame also from the front top bit of uni strut going to ceiling to bits of 10mm threaded bar going for extra support of pj.mike

[Mad Mr H]

the two vertical unistrut bars that fix to the back wall need to be long.....

This is so the fixings can spread the weight of the PJ on the long arm up the wall.

If the long arm is 30 inches long, then I would suggest that the wall vertical is longer than the 24 inches suggested, in fact longer than the 30 inches......

I cant do the structural maths so cant work out the correct size and fixing distances.

A local "City Electrical Factors" will be able to supply the additional unistrut you require, ask them for "deep channel unistrut".

[AV nutter]

Hi andy unable to go more than 2ft on veritical as for the ceiling slopping but can go from front to ceiling with some kind of fixing and maybe in the middel hope so.mike

[AV nutter]

Ok lets see if anyone can make senes of this please im very sorry to be hard work on this i know what i want to say but just not going my way hope this help off we go the two bits raw bolted to back wall on 8 bolts leaving 30 to 36 inches comming off back wall by using the supports and gave i should be able to put two 10mm or more support rods up into ceiling to handel the weight also another two in middel to spread the weight im hoping .mike

[AV nutter]

http://www.steelwirerope.com/contact.html Just spoken with a guy who can help me make the rope to size for my pj not cheap but will have a working load of 164kilos or somthing cant rember but more than i need so just hv to wait for a bit to save for to more lenghts of uni strut plus wire cable and eye bolts great life this hey never a dull moment lol.mike

[Mad Mr H]

What price is the 160Kg wire rope ???

[AV nutter]

£25 plus vat for 10 meters will know more when e mail arrives.mike

[AV nutter]

Hi andy total cost for other bits as follows 2 x 3m uni strut deep channel £35
10m of metal rope about £30including vat 6 bolt eye fittings £30 plus vat in total about £120 to build bracket and bolt to ceiling them money for pj to be set up

[AV nutter]

Good on andy came up trumps again my nuts are on route for pj bracket only need pretty pics how to build bracket please any takers lol .mike