AVR250 OSD Problem

umboppa · 23-01-2006, 5:40 PM

All my video outputs are connected directly to the TV (i.e. not through the receiver). To view the OSD, I currently have the monitor out connected to the Video 2 input on my tube TV. This worked perfectly until yesterday when the Video 2 screen decided to contract at the bottom and enlarge at the top and, in doing so, push most of the commands offscreen. Nothing I do seems to return the screen back to its original, unskewed state. My other video inputs to the TV are unaffected.

What has suddenly decided to go wrong, and how do I correct it?

Thanks in advance.

23-01-2006, 5:40 PM	#1 (permalink)
umboppa New Member Join Date: Jun 2005 Posts: 13 My movie collection iTrader: (0) Thanks: Gave 0, Got 0	AVR250 OSD Problem All my video outputs are connected directly to the TV (i.e. not through the receiver). To view the OSD, I currently have the monitor out connected to the Video 2 input on my tube TV. This worked perfectly until yesterday when the Video 2 screen decided to contract at the bottom and enlarge at the top and, in doing so, push most of the commands offscreen. Nothing I do seems to return the screen back to its original, unskewed state. My other video inputs to the TV are unaffected. What has suddenly decided to go wrong, and how do I correct it? Thanks in advance.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode


AVForums.com is the UK's biggest & best home consumer electronics discussion resource
Search AVForums.com