Connections to extron

[steve in derby]

I want to connect a panasonic m40 video camera to an extron system 8 plus.
Using video output on camera into extron switch input.
This will want to be outputed to an infocus projector.
I am confused at what cable between camera and extron (bnc conections). :lease:

[Blaze01]

Steve,

From what I remember the System 8 has BNC inputs and and outputs but does not convert the video signals.

If you are using Composite Video then you can pass through the any channel but I would use the RED. If you are using S-Video (YC) then use the RED and GREEN, if your camera outputs (YUV) Component then go in on channels RED,GREEN,BLUE.

Remember as the swicther does not scale or scan the video signal so the input must match the input in the display device. E.G YUV in on switcher must go to in YUV on the display device.

I hope this helps.

[steve in derby]

Cheers. That helps me out. :hiya: