Video out settings on Denon 500

[Smiffy 2]

Have been using my Denon system now for a couple of months with no problems but yesterday afternoon saw me tinkering with the settings as I was getting an unusual display in the top left corner of the telly. Turned out to be the television that was at fault, one of the kids had altered the settings on that!
But reading through my Denon instruction manual I came to the section covering "VIDEO OUT" settings and according to the blurb I should be able to scroll through S-VIDEO/COMPONENT/SCART as my desired output source.
Well, try as I might I can't find the choice for SCART!
Bearing in mind my system is connected to the TV via a Scart lead, I'm a bit perplexed!!
Picture and sound quality seems perfect but could anyone else with this system just run a check and see if they have the Scart option available within this menu please?
Many thanks
Rob

[Conn]

I get S-Video, Component and RGB...I suspect RGB is the Scart option as this certainly gives the best picture

[Eddy Boy]

RGB is the choice for scart. S-video is another choice for scart. Componet is only for the actual component connection.

[Smiffy 2]

Thanks for the replies lads.
S-VIDEO/COMPONENT/RGB was what I was getting and assumed RGB was the correct one.
Just didn't remember setting it there when I initially set up the system.
Thanks once again
Rob