AVForums.com is the UK's biggest & best home consumer electronics discussion resource New to AVForums.com? Start by reading our introduction here.


Go Back   AVForums.com > Video Electronics > LCD Televisions > LCD Brackets and Mounts

Reply
 
LinkBack Thread Tools Display Modes
Old 31-01-2005, 1:58 PM   #1 (permalink)
New Member
Join Date: Jan 2005
Posts: 18
iTrader: (0)
Thanks: Gave 0, Got 0
Exclamation What height should I mount my 32pf9986

Hi

I'm Mounting my 32pf9986 on the wall this evening and wondered if anybody had any advise on Height. I sit Approx 3-4M Away from screen.

I realise this is probably alot to do with personal prefference but wondered if anyone had any do's and dont's before I start Drilling!

Cheers
craigsomers is offline  
Reply With Quote
Old 31-01-2005, 2:15 PM   #2 (permalink)
Member
Join Date: Mar 2003
Location: Leicester
Posts: 103
iTrader: (0)
Thanks: Gave 1, Got 0
i put mine 46.5 " to the top 2 screws that go in the mounting plate and sit about 3 meters away.this put the centre of the screen roughly eye level. But each to there own i guess lcd's are generally better when looked directly at.

cheers mick

p.s wait for a few more answer before going mad with that drill
Hunterm8 is offline  
Reply With Quote
Old 31-01-2005, 2:16 PM   #3 (permalink)
Senior Member
 
richjthorpe's Avatar
Join Date: Aug 2004
Location: dat london
Posts: 1,702
iTrader: (2)
Thanks: Gave 20, Got 16
Being 3-4m away, there's not going to be much of problem mounting it too high. We sit 3m away and have it mounted about 1.5m from the floor to the top of the tv so the bottom is about 0.8m above the ground. I put it here because we've got lowish sofas (Only 0.6m high) and it's mounted behind a sofa. So when we are watching it, we're looking slightly upwards at an angle.

One thing to make sure before drilling is that there aren't any power cables or pipes in the wall

At the end of the day, it's a personal choice. My suggestion is to get a piece of cardboard cut to the size of the TV and stick to the wall where you want it. Move it up and down until you're happy and mount it there.

Richie.
__________________
Sharp LC32GA3E LCD TV, HTPC, Denon AVR1601 Receiver, Canton Movie CD-1 Sub/Sat System, Digifusion FVRT100 Freeview STB, PS2.
richjthorpe is offline  
Reply With Quote
Old 31-01-2005, 2:17 PM   #4 (permalink)
Senior Member
 
ianh64's Avatar
Join Date: Aug 2004
Location: SW London/Surrey borders
Posts: 2,230
iTrader: (0)
Thanks: Gave 25, Got 79
Get someone to hold a cardboard cutout the size of the screen and move it to the height and position that you feel most comfortable with.
__________________
-Ian

ianh64 is offline  
Reply With Quote
Old 31-01-2005, 2:18 PM   #5 (permalink)
Senior Member
 
richjthorpe's Avatar
Join Date: Aug 2004
Location: dat london
Posts: 1,702
iTrader: (2)
Thanks: Gave 20, Got 16
Hunterm8,

That's quite precise with your measuring. Just to add though, I drilled mine 43" for the top screws
__________________
Sharp LC32GA3E LCD TV, HTPC, Denon AVR1601 Receiver, Canton Movie CD-1 Sub/Sat System, Digifusion FVRT100 Freeview STB, PS2.
richjthorpe is offline  
Reply With Quote
Old 31-01-2005, 2:45 PM   #6 (permalink)
New Member
Join Date: Jan 2005
Posts: 18
iTrader: (0)
Thanks: Gave 0, Got 0
Thanks Guy's Will try the Cardboard trick 1st I think's. Feeling slightly nervous about the whole affair, I's sure I will be sleeping with one ear open tonight , for a loud crashing noise in the Lounge. !!!

But will be worth it in the end.


Cheers
craigsomers is offline  
Reply With Quote
Old 31-01-2005, 2:49 PM   #7 (permalink)
Member
Join Date: Mar 2003
Location: Leicester
Posts: 103
iTrader: (0)
Thanks: Gave 1, Got 0
i used 4 metal type rawl plugs that have a metal like collet that opens up as you tighten thaink that threads about m5 using 10mm a/f nuts.
Hunterm8 is offline  
Reply With Quote
Old 31-01-2005, 3:23 PM   #8 (permalink)
Senior Member
 
jimsan's Avatar
Join Date: Oct 2004
Location: Dumfries, SW Scotland.
Posts: 1,568
iTrader: (0)
Thanks: Gave 0, Got 0
Basically, the centre of the screen should be as near eye level as possible whilst in your favourite viewing postion. (Horizontal on the Couch - Mine really should be mounted vertically!)

Jimmy
__________________
Sometimes I sits and thinks......... but sometimes I just sits.
jimsan is offline  
Reply With Quote
Old 31-01-2005, 4:14 PM   #9 (permalink)
Senior Member
 
richjthorpe's Avatar
Join Date: Aug 2004
Location: dat london
Posts: 1,702
iTrader: (2)
Thanks: Gave 20, Got 16
Quote:
Originally Posted by craigsomers
Thanks Guy's Will try the Cardboard trick 1st I think's. Feeling slightly nervous about the whole affair, I's sure I will be sleeping with one ear open tonight , for a loud crashing noise in the Lounge. !!!

But will be worth it in the end.


Cheers
I was exactly the same the first night of hanging it up. Didn't think I would be until I was going to bed. Luckily, we've got a sofa directly in front of the tv, so just pushed it back to the wall and put some more cushions on it....but not too many more so that the tv would bounce off and crash on the floor mind !!

I used 4 12mm bolts with the metal rawl plugs and 10mm nuts.

Richie.
__________________
Sharp LC32GA3E LCD TV, HTPC, Denon AVR1601 Receiver, Canton Movie CD-1 Sub/Sat System, Digifusion FVRT100 Freeview STB, PS2.
richjthorpe is offline  
Reply With Quote
Old 31-01-2005, 7:28 PM   #10 (permalink)
Member
Join Date: Oct 2000
Posts: 313
iTrader: (0)
Thanks: Gave 0, Got 1
Philips recommended height is to have the centre of the screen 900mm from the floor, which is pretty much spot on, unless you have a particularly low sofa.
Alan D is offline  
Reply With Quote

Bookmarks

Tags
32pf9986, height, mount


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT +1. The time now is 4:12 AM.

AV ForumsOptimised for Firefox.
RSS Feed
AVForums.com is owned and operated by M2N Limited.
Copyright © 2000-2008 M2N E. & O. E.
Global Gold
Web Hosting