 |
|
11-04-2004, 10:02 AM
|
#1 (permalink)
|
|
Member
Join Date: Jan 2001
Location: North Yorkshire
Posts: 430
Thanks: Gave 0, Got 2
|
How to do full eeprom reset on NEC 6pg+ ??
I have a second 6pg+ that I want to do a full reset on ready to go in my new home cinema room - I think the code is 2850 to get into service menu but how do I do that and is the code correct ???
__________________
NEC 6pg+ CRT, 2mtr 16:9 fixed screen,Panny PW6,Tag AV32R 192-EX 7.1,Tag DVD32R,Rotel RMB 1095,Rotel RB 985 THX,3 @ M&K S - 150 thx, 2 @ M&K SS - 150 thx rears, Velodyne CHT - 15 Sub, Lumagan HDP scaler, Denon 2900 DVD, Sky HD, Pronto@2,Behringer feedback destroyer
|
|
|
|
|
18-04-2004, 7:01 PM
|
#2 (permalink)
|
|
Member
Join Date: Sep 2001
Location: Hamilton
Posts: 290
Thanks: Gave 11, Got 15
|
I think you will find the code is 2580.
This engineer code will only work if you have already defined a user code.
Once you have entered it you will find extra menus available.
Be sure you know what you are doing as a factory eprom reset will wipe everything including standard setings like PAL and NTSC. it will leave you with no memory blocks defined at all. It will also zero all user hours and factory hours on the tubes.
Make sure you really want to proceed !
__________________
Alan Head
Screen build Cinema room build
|
|
|
|
|
18-04-2004, 9:09 PM
|
#3 (permalink)
|
|
Veteran Member
Join Date: Jul 2001
Location: Norwich
Posts: 5,625
Thanks: Gave 24, Got 177
|
Really dont recommend this, you can leave yourself with a stuffed projector, if it has ever been adjusted away from factory spec you run the risk of not being able to get it back to a useable condition without the correct equipment.
You are best to go back in to the menus and just manually zero everything out, pain in the arse I know but far safer.
__________________
No Darling.......I've had it for months
You can ask as many times as you like, but the answer will always be the same........
"Get a bloody demo and decide for yourself!"
|
|
|
|
|
19-04-2004, 8:48 PM
|
#4 (permalink)
|
|
Member
Join Date: Jan 2001
Location: North Yorkshire
Posts: 430
Thanks: Gave 0, Got 2
|
Thanks for the replies, A few days ago I managed to get the info and reset my spare machine and as far as I can tell everything is ok 
NEC 6pg+ CRT, 2mtr 16:9 fixed screen,Panny PW6,Tag AV32R 192-EX 7.1,Tag DVD32R,Rotel RMB 1095,Rotel RB 985 THX,3 @ M&K S - 150 thx, 2 @ M&K SS - 150 thx rears, Velodyne CHT - 15 Sub, Lumagan HDP scaler, Denon 2900 DVD, Sky HD, Pronto@2,Behringer feedback destroyer
|
|
|
|
| |
Optimised for Firefox.
Linear Mode
