- Ground Loop?
- Total newbie - owner of Pioneer Kuro lx5090 - need advice on Video Processing etc.
- YpbPr to HDMI converter
- Can I get 1080p50 from a Crystalio 1 to drive HD750 (with DVDs)?
- DVDO VP50 output to CRT & plasma. Will this work?
- How does the DVDO edge compare with the VP30?
- DVI Detective wanted for mac mini resolution problems
- VSync problems! Help needed urgently.
- RCA/Scart to VGA/HDMI
- switch box with s-video out
- Any Video Processors with 3 RCA Component output
- Key Digital HD LEEZA HELP!!!
- Component - HDMI conversion
- manual for Vivanco mixer VCR 4045
- Upscale and Deļnterlace (HQV)VGA-card or standalone?
- New CMS equiped VideoEQ Pro
- Cine HD Scaler CMS £600
- Should I purchase the OPPO DV-983H DVD player to upscale SD on the Panny 50" G10 ?
- Do I need a scaler?
- Vga + HDMI switchbox
- Recording Consoles And Play In HDMI
- Connecting my PS3 to my BENQ G2200w please help
- 23.976 driving me mad in the UK
- Resolution/scaling issues on Samsung TV
- Second Hand Pricing DVDO Edge
- Small screen when connecting Laptop to Plasma
- AV to YPbPr
- Please tell me why I need a scaler/vp.
- Need to upscale an HD image
- coaxial help
- HDMI - 1 source to 2 displays - splitters
- HTPC always outputting 1080p - can a VP help?
- Recommended RS232 cable for a DVDO VP3
- 1080i 60hz to 50hz component converter?
- Analogue UHF Tuner with YPbPr Component or VGA Output
- PSU for Iscan Ultra
- YPbPr -> VGA 1080p Transcoder Box problem.
- New Radiance XS
- New DVDO iScan Duo
- Question about Progressive and Interlaced Scannning
- What format to use for vid on sd card in PANA txp46g10
- 50hz Flicker on Samsung STB.
- Portable VGA mirroring
- Oppo HM-31 annoyances
- Splitting HDMI to TVs with mixed abilitys.
- Motionflow 200Hz, Panasonics 600Hz etc
- Component Video (YPbPr) to HDMI Converter Adapter
- Recommended Laserdisc player to output purist signal?
- Recommend a DVD Player to accompany a HDP
- How to Enable Progressive Scan in LCD Monitor?
- £1000 scaler trade-in at Convergent AV
- Lumagen's site ... hacked!
- What device should do the upconversion?
- HTPC Scalers any good or use a external version help
- Is there a component->vga converter that can output a 50HZ vga signal?
- VBOX HD360 , can I make it display 50hz vga signal?
- Composite to Component Upconversion
- External Processing for Panasonic TC-P50V10
- Mixer to Beamer: Resolution & signal questions!
- Horizontal scaling (702 vs 720 etc) - how good?
- Timings VP50 @ 480x852 60htz for DVI blade
- DVDO Edge IR port control
- Video scalers/processors for Amstrad SKY HD
- DVDO Edge support for 288p possible?
- Trouble in paradise....
- HDQ to Panny PWD6 DVI
- Really Confused, Really need help..
- input mod, output mpeg - rendering problem
- Need Help with BT Vision Scart to 15 pin VGA!
- HDMI Splitter to Lumagen - question.
- Buying Blu Ray - VP50 Up to The Job?
- HDMI Upscaler
- VP50 with DVI into Panny
- lumagen vision pro
- Realta vs Anchor Bay........?
- Lumagen
- Edge or Pace/Samsung for SkyHD SD?
- Which component to let do video processing (Sky HD or pioneer receiver or panel)?
- DVDO Edge auto aspect ratio
- motion judder on Marantz PJ
- barco808s Scaler suggestion
- Half a picture in 720p
- Best way to split hd signal.
- Sky scaling question
- Pioneer PDA-V100HD
- PACE SKY+HD Box and Video Processors
- Upscaler?
- Upscaling
- Will a Scaler benefit Sky SD quality on a Panasonic 42 G10
- Which component to do the processing?
- VGA to TV not working?
- Lumagen VP - worthwhile or not?
- Radiance zoom problem?
- Oh PReP, how I miss thee
- Can I get a decent scaler on a budget?
- DVDO VP Scalers - HDMI Switching
- can I convert a connection using dvd recorder
- Harmony remote and Lumagen HDP
- Virgin V+, HDQ and SD/HD display setup/connection
- SD and Video Processing
- Virgin V+, component into iscan HD+ green picture?
- Basic scaler help
- Lumagen DVI, just scaling the picture from a DVDO EDGE
- ISF'd Pioneer - Lost on Amp Change?
- Motion Judder on SKY....
- Nintendo wii - 480i v 480p question
- RGB SCART to YUV magenta tint
- What scales best?
- Do I really need a video scaler ?
- Has my Lumagen HDQ bitten the dust?
- DVDO Edge processor PART 2.
- Hdmi 1.4
- DVDO Edge with TAG AV192R/VSM2048
- Converting video to Nokia E71
- Please help create a list of DVDs to test PAL deinterlacers
- Help with Cameras, video switchers etc
- Can't get signal through Component
- Convert 50Hz to 60Hz
- What is best setup with sclaer for SD DVD
- Does the new Sky HD operating system and GUI fix...?
- AUTO broken in new EPG's TV Guide menu -- but there is a silver lining
- Radiance XD - £3.5k of an improvement?
- Help a NOOOOB please?
- SD broadcasts on SkyHD channels
- active scart splitter
- scart rgb to component/hdmi scaler/converter
- iScan HD+ - Problems using component Input
- Advice: Video Processor, Switch Box or AVR
- VGA to Component
- convert RGB scart to hdmi?
- Composite to RGB
- Lumagen HDP into Sony CRT? is it possible?
- Help! Just a few scrambled lines from Lumagen HDQ
- how much roughly should i pay for an ex demo hdp pro?
- Gefen VGA to DVI Scaler
- Teranex can do 50/60Hz conversion without judder?
- what can i use a zinwell progressive scan converter for
- Refresh rate question
- Is the DVDO Edge a flawed product?
- Serial to Usb Adapter for Lumagen HDP
- Laserdisc to Plasma
- Lumagen HDPro & Arcam AVR600. Should This Work?
- Judder / motion issue using iScan HD+
- Colour space mismatch (digital TV)
- Bd-55 1:1 pixel mapping problem.
- DVDO Edge Audio Output (HDMI/Optical)
- Arcam DV27a with Lumagen VisionHDP - overscan problem
- Edge and Popcornhour A-100
- What gamma do you use
- Lumagen multiple output
- Cost effective way to switch between 2 sdi sources?
- No DD5.1 from Sky HD via VP50
- PC for vertical stretch
- Samsung Billion Dollar Scaler
- Inputs for Epson EMP-400W Projector
- Blu-ray player that also forces PAL to 60Hz
- DAC for VPs?
- Pioneer 51FD -> DVDO Edge -> KRP-500A + analogue audio = lipsync hell...
- EDGE as pre-processor for Radiance
- Ideal Blu-ray player for Video Processors / Scalers
- Panasonic 42PHD8 - Pioneer BDP51FD - Sky HD - Possible Lumagen HDP = Connection Prob!
- Grey bars on 4:3 picture
- Which TV using DVDO Edge Scaler ?
- Arcam using Pixelworks for new high-end kit, not ABT?
- New PRODUCT REQUEST
- External Processor worth it with LX508 Kuro?
- Vision HDP and DVI terminal board
- DVDO Edge Bitstream ?
- Video switch
- Crystallio II 3800 black for sale
- No judder with Blu-ray at 60hz - Samsung LEA656
- Dvdo vp50
- Replacement PSU for VP50, mines dead
- is it worth getting a scaler with my setup??
- Scaler for anamorphic stretch?
- PC to TV project
- Convert vga to rgb
- Which Sky HD box to go with Crystalio II
- New system advice please
- Want to buy a scaler but a few questions first
- Question(s) about video connection formats
- Clamp width & position settings?
- What is the effective resolution of High Definition?
- DVDO Edge and Lumagen
- Output to 2 TVs from a lumagen HDP
- VP20+deinterlacing card any good?
- Lumagen HDP EDID Pass through
- Beosystem 2 MK III
- What to prepare for projector?
- Maybe need a video scaler - anyone help?
- Jaggies/stairs from my DVDO Edge - why?
- New 50" Plasma owner looking for advice on inexpensive scaling options for Sky HD SD
- tv or dvd scaler
- Please help!
- 58" Viera or PF11 with Radiance XD
- Anyone know what "Serious Error 12" on VP50 means
- Switching HDMI through an AV receiver to an HDP
- VP 30 passthrough? Possible
- Is the EDGE a better scaler than the Denon AVC-A1HD?
- Onkyo integration of Reon vs Faroudja DCDI Cinema
- Visual Calibration
- Budget processor with NVidia style gamma correction + RGB controls
- vp50 handling of animated video
- Upscaling In TV just like DVD
- Blu-ray and DVDO HD+
- Why Top Gear reports look bad on DVDO Edge
- KRP 600A and Crystalio II 3300
- Back to Basics
- Framerate problem
- Vivanco VCR 4044
- VP50 v Edge for SKY HD SD channels
- HQV REON-VX or PIONEER KURO ?
- vp50 and the miracle of 1080p
- Scaler with Panasonic PH9
- Cannot get 1080P via Lumagen HDP when using Blu-Ray Player
- Lost HDCP handshake on my VP50 :o(
- upscaling?!
- LX5090 or 500M with DVDO VP50
- Iscan HD to PJ with VGA not connecting
- 3D Processors Emerging - Anyone Add to What I Know?
- edge v1.1 v lumagen
- 50hz to 60hz with DVDO Edge
- Upscaling - DVD Internal vs TV Internal and Cheap External Question
- Iscan HD and Laserdisc Player
- Upscaling question
- Any Need For Genlock & Cue For 1080p/24 Blu-ray?
- Lumagen HDQ Set-up
- Lumagen HDQ - can you make the grey bars black?
- CCTV editing
- Blu-Ray to VP connectivity
- DVDO Edge resellers - In stock?
- Lumagen HDQ and HCPC EDID
- Lumagen HDQ Dual Digital and Analogue Output
- VHS > DVDO EGDE > DVD-recorder
- Putting it another way :o)
- PS3 and Lumagen HDQ - is this right?
- 60htz and 50htz problem
- Wanted crystalio vsp 3300/3800
- krp500M The Radiance XD
- Sony BDP and Lumagen HDQ
- Which processors have greyscale correction facilities?
- Lumagen HDQ and a HTPC (loss of detail)
- Should a BlueRay Video Signal go directly to Lumagen
- lumagen DVI
- DVDO VP50Pro with Pioneer Kuro KRP-500M
- Would I Benefit From A Scaler?
- Upscale Virgin box
- Iscan HD+ not passing thru HD signals
- Will there be new DVDO Edge software soon?
- Lumagen HDP and Panasonic 50" PF10