- Sound Breaking Up
- Optical to RCA audio converters
- What degrades music more: AVP or speaker switch?
- Internal vs External test tones
- Computer USB -> SPDIF -> External DAC, does the USB component quality even matter?
- Arcam AV9/P7
- How to default Rotel RSP-1068 to 2ch
- Class "D" / Digital amplification
- HT Improvement: Tips for a separate Amp???
- What exactly is the function of a dedicated separate AV processor?
- What options do I have available?
- Bitstream vs PCM
- Meridian 568 problem
- Am I using TWO preamps?
- Resonance potentiometer warning in manual Rodec Sherman Restyler
- Power Amp recommenadtion
- Quad 909 vs Quad 99 monoblocs
- Upgrading to power amp
- Which 2nd-hand stereo power amp to use with Denon 3310?
- Upgrade Dilemma
- Power Amp Mains Requirements
- Anyone used budget PA power amps for AV duties?
- Wanted: Creative DDTS 100 Decoder
- all-in one receiver or separates, which will be better
- Which DAC for my Needs
- iScan Duo audio processor options - Audiolab 8000AP vs. Rotel RSP-1069
- DTS and DD to analogue...
- Bi-Amping Method and benefits?
- Power amp used Lexicon LX7 or too risky?
- Jitter and the Audiolab 8000AP
- Processor Recommendations (replace a 1068 processor)
- Looking for advice on 2nd Hand Pre & Power Amps
- 4 Channel Power Amps?
- Stereo System.
- Lexicon mc8 question
- Which Power Amp for next upgrade
- Help identify old Noble Pot pins
- L/R poweramp hot---centre amp not, why?
- Naim AV2 and new analogue out BDP or switch to Arcam AVR600?
- Rotel vs Arcam multi-channel poweramp
- Help please!
- Experiences dts re-encoding - Cyrus AV8
- Help with my little project
- Which Pre-amp?
- Pre-pro with older power amps.
- Novice seeks help with connectors please
- pr-sc886
- best value processor and amp for B&W XT 5.1 speakers(sub=pv1)
- Pre/headphone amp suggestions
- AV preamp
- Cambridge Audio A5 Problem
- Music amplifier or surround?
- Audio Research VS60 and Monitor Audio GS60
- Arcam AV888 vs Anthem AVM 50v
- what power amp?
- Will a Pre Amp improve the sound ?
- Class D power amps Rotel vs Bel Canto
- Kenwood Basic M2A Shuts Down at Higher Volume
- Stereo -> Active sub = sounds horrible
- dacmagic
- Arcam p7 problem
- OEG SDT-S-109LMR what is it doing?
- Building graphic equaliser using ic BA3812L
- Quad connection Query!
- Cambridge Audio - pre Ritcher Sound 1990s
- 1 Amp, 4 speakers, different ohms etc
- Cambridge Audio DacMagic PSU Recall
- Sick of having to change volume...
- Rote RSP 1068 Surround Sound Processor
- Rotel RMB-1075 Power Amps
- Octava HDS7A-UK -any opinions?
- Remote control volume.
- AV with Acoustic Energy Aelite 5.1
- HD decoding pre amp
- Rotel RM-1572 - Experiences
- BOUYER AR1150 & Pa 1150
- Arcam P7 vs Primare A30.5
- Amp for 4x monitor speakers
- Is there such a thing? Is it possible?
- Sound level / pressure meter.
- Power amp for Rega Mira 2000
- Test disk for setting speaker levels
- mission 753 (non freedom) + 2x audiolab 8000p good match ?
- HDMI or Analog Audio?
- Rotel RMB-1066 valuation please
- MC12 EQ query
- Denon adv-1000.
- Rotel 1075 Power Amp Channel Dead?
- Amplifier to pair with Monitor Audio RS8
- Audio sync box - Phono
- Arcam P7 mains requirements
- Rotel 1098 or Audiolab 8000AP
- Harmon K Just Sut Down "PROTECT" Mode
- RSP-1570 AND XBOX 360 elite ISSUES
- ax2 vs?
- PA Help
- Audio Research Classic 60 (ARC 60) - Valve Power Amp
- Cambridge Audio A5 - Damaged
- AV Preamp after av processor
- Budget of £1k for amp and processor
- Bi amping stand mounts?
- Plinius
- help me choose my new kit!
- Rotel RSP-1098 now cheap too
- What would you buy ? 888 or SC5507
- State of play at Meridian
- Arcam AVP888 so who is using this ???
- Benefits of upgrading Meridian 565 to G61R?
- Keep Alpha 10p or get a 1000p
- Behringer EP4000: can it run 2ohms in bridged mode?
- quad 99 stereo with audiolab?
- Technics SE-M100
- My DIY Power Amp
- audiolab 8000ap + 8000p for benchmark dac1 pre
- What is the difference in amplifiers "class"
- How good is the MC-12B for stereo?
- Lexicon mc1 questions?
- Bi-amping by hacking an AV amp
- chord spm-1200c + wharfedale diamond 9.6
- Amp ground loop problem :o(
- Classic 8.0b Power Amp - Too good to be true?
- Creative DDTS-100 Decoder
- how much power?
- Whats the best setup for Arcam DiVA AVP700 Preamp Processor?
- Options for best of both worlds?
- Parasound amps & QED ailrloc plugs
- Rotel RSP-1570 hd audio query
- Artcoustic PA300 Help
- between a rock and a hard place....
- My amp is just too hot.
- So what are my processor options??
- Integrated Amp + Receiver or processor + Amp
- Procesor Shootout: Arcam AV9, Lexicon MC12, Proceed AVP2, Upgrade Company Onkyo SC885
- Rotel rc-06/rb-06 or campridge audio azur 640A?
- Valve amps anybody ? Issue with KT88 Valve Amp
- New Onkyo processor announced
- Poweramped centre- disappointing
- Yamaha reciever and power amp advice.
- Marantz AV8003 Processor
- bi amp onkyo 876
- Using pre-outs = more heat ?
- Advice - Should I go with a seperate amp?
- Rotel Rb-1050 + onkyo 876 pls help me
- AV amp or Stereo Amp
- Emotiva UMC-1
- intergrating headphone amp?
- Would this be stupid?
- HD621 experiences for Meridian?
- Thinking of going down the route of a power amp setup
- Fixed vs Variable output from Quad CDP2?
- Linn AV 5125 Dynamic Power Supply Upgrade
- Onkyo 886 Processor and Rotel RMB-1575 Power Amp or Denon AVC-A1HDA?
- Can I use a separate amp with my Denon 1909
- Anyone got a Lexicon processor & Parasound amp(s)?
- Faulty PSU in Linn 5125 Amp
- Opinion about the Proceed amps
- AV Amplifier vs processor
- My new Exposure 2010s power amp
- Alpha 10 internal switch, how to do it
- Completely replacing my kit - where to begin?
- Marantz SR6003 as pre/pro with ADA power amp?
- Quad 405 Power Output Query
- primare pre 30 technical differences between new & old
- TOSLink to Analogue Amp
- Can i use an intergrated amp as a power amp
- technics seperates
- 7 channel power amp for 5 channel duties
- Is it worth adding a stereo power amp to an SC-LX81?
- Biamping- power additive?
- Please advise on NAD 916 power amps
- Replacement Stereo Amp
- 110v > 240v Transformer for a Sunfire Amp - Can you recommend ?
- Rotel RB-03 vs NAD C270 vs Audiolab 8000p
- What amps to power a Lexicon MC-1
- Is a budget power amp worth it?
- Help for Amp for PS3 and PC to surround sound
- Mixing poweramps for front 3 speakers?
- Rega Exon 3's
- Amp for B&W 601 S2's
- What happened to lexicon
- High end processors VS low end processors/receivers, hardware differences?
- Can I biamp centre with poweramp+875?
- Adding a power amp to an Onkyo TX-NR905
- Nokia 3109 mobile dac - why so good?
- Merging Stereo and 5.1 Setup - Help!
- Computer as a source to hi-fi?
- Bryston 7B-ST
- Adcom uncovered
- What A/V Preamp Processor to buy?
- Rotel 1570 upscaling
- quick question power amps on carpet
- Krell S1200/S1500
- Meridian G55 power amp
- Yamaha DSP - E800
- 3 channel power amp-suggestions?
- Processor comparisons v2.00: AVP-2 and MC-12
- Arcam AV8 switch on time - normal?
- Pre-amps with a subwoofer output????
- Processor Choices?????
- Lexicon MC1 & HD Audio Formats
- Can the Proceed AVP cut it as a preamp for music?
- Yamaha DSP-AX716 into Rotel RB-985 mkI
- What do you make of these amps?
- Where to buy studio / live audio gear?
- Adding AV setup to existing Hi-Fi system
- Pre pro's with integrated Audyssey Pro level processing ?
- Which speaker switcher??
- Current Shortlist - Krell, Denon, Classe, Pioneer, Arcam - which is most Suitable
- Does anyone have the Rotel 1570/1575?
- New NAD M15 HD Processor
- Audio Lab running HOT
- Power amplifier options
- Lexicon MC12 or Bryston SP2
- Biamping - right or wrong?
- Desperately need everyones...HELP!!
- Audiolab 8000M Issues
- Cinepro 3K6 1st impressions / advice
- Amplifier for Tannoy Sensys DC1, £500 budget
- Amplifier Impedance & Wattage Question - Need Help!
- AV Processor feeding main hifi amp - help
- Audiolab 8000A vs Arcam Alpha 8 vs CA Azur 340A
- What amplifier to drive Mission M30i speakers from a squeezebox 3 classic?
- Usher R1.5
- How can a high pass filter affect sound in an amp driving just tweeters ?
- Can't get 5.1 digital sound
- Bi amping with different amps
- Right louder than left?!
- Denon AVCA1 Amp
- Digital to 6 channel analogue converter
- Power Amp Stopped Working
- Blue Ray sound through Yamaha 3 channel Amp
- Comparing AVP-2 vs SC886 vs AV9
- Marantz dp 870?
- Would you add a valve amp to an AVR?
- Arcam Av9 Processor vs Onkyo 606
- Upgrading Onkyo Amp speaker binding posts
- Arcam FMJ AV888 Processor
- Can you play with the "bias" to alter amp sound ?
- Need Help!! DCX2496 Crossover or not to crossover??
- Speaker Size Settings, Large, Small, or Small with lower crossovers?
- Analogue to digital convertor??
- processor for 2 channel
- SPDIF bandwidth and blu ray audio
- Does dolby decoder give you 5.1 surround sound?
- audiolab 8000ap/x7 default?
- Anthem D2V and AVM 50v
- Technics SU-Z11 Amp No sound?
- New HD processor choices
- Arcam FMJ AV9
- Why does sub work on DTS MA but not Dolby?