Hello and thanks for all the help in the first part of the topic.
You will probably think that I am nuts, but it's been 4 months since I got this tv, and I still can't get a decent picture out of it. I really need help, as I am even thinking of giving it to my parents and go and buy myself another. Here are the two settings I am struggling between:
-The "good quality, but dull looking" setting:
Mode:Movie
-Backlight: 7
-Contrast:95
-Brightness: 49 (configured so by the eye using
lagom lcd patterns, so that 2% is visible)
-Sharpness: 20
-Saturation: 50
However, everything is looking a little bit washed out and dull in this setting, it just doesn't have the bright colors of the second setting
-The "good looking but not so good quality" setting:
Mode: Normal
Backlight: 7
Contrast:95
Brightness:51 (configured so by the eye using lagom lcd test patterns, so that 2% is visible. It's exactly the same with the brightness of the other mode, even if the number is higher)
Sharpness: 20
Saturation: 50
However, this mode tends to loose quality in darker parts, no matter how much you increase the brightness (increasing brightness only results in showing up the parts of the dark areas that were crushed to black). This mode crushes the dark blue and dark red parts of the picture more than the dark green, and doesn't crush the dark grey/white ones (this results in a weird picture ofcourse). I would like to keep this mode as it is, with only removing the black crush effect. If it's the DNIe+ causing it, I want to get rid of the DNIe+ by any means possible (my set doesn't have a control for the DNie+ in the picture settings menu as bigger models do)
How can I get rid of the DNIe+ ? Please help! How can I remove all sorts of "retouching" from the normal mode?
For 4 months,
I can't watch dark movies properly in this set, as the DNIe+ (or whatever else causes the black crush) removes al detail from the dark backrounds (so, I have to switch to the "dull" mode everytime)
(if I need to get to the service menu, please also bother to tell what settings I need to note down in order to be able to revert to the factory settings, and what I must not mess with, cos this place is little bit of dangerous for non entusiasts like me)