Quote:
Originally Posted by Paulclane  My Sky HD box in sat/Cbl was fine but now intermittant, I have to unplug/reconnect the HDMI cable to bring it back. The HD box works fine through my TV
The "AVR2312" that was displayed on my Sharp Aquos 46" (top right corner, shows which input is connected on TV), now just displays "BD". (The TV displays "SKYHD" and "XBOX360" when they are directly connected). |
That's odd, have you tried a full power cycle of both amp and TV? Unplug both from mains then reconnect.
Dodgy HDMI cable perhaps? Use another HDMI cable from amp to TV just to rule this out.
Let me just ask though, did you rename the inputs on your TV or does it recognise what kit is connected to it and renames the input accordingly? Just slightly confused by your description.
Quote:
|
Originally Posted by Paulclane The sound is OK, but with my very old Sony DTS amp sound jumped out more and handled low volumes much better, I'm sure I will figure it out soon |
You've not set it up correctly. Either that or you just set your old amp up incorrectly and just gotten used to that sound so just prefer that sound?
Try tweaking the sound yourself. Turn off Audyssey and see if you prefer it then..
Quote:
|
Originally Posted by Paulclane One other thing happening now: keeps saying "assigning Network" on USB/net setting, seems stuck in loop |
It'll do this when you switch to this input whilst it connects to your router and obtains an internet connection. Should only take a few seconds though. I've heard some amps are more picky with what routers they're connected to - although i've not had any problems with mine connected to a Sky Netgear Router, Asus RT-N16 Router and also my TP-Link switch. What's your internet connection like?
Have you tried connecting directly to your modem to see if that improves things? If so you know where the weak link is.
Quote:
|
Originally Posted by Paulclane Are they all this glitchy? |
No, although they're not perfect.
Quote:
|
Originally Posted by Paulclane Why does the menu only come up sometimes? |
After you've selected an input on the remote, you need to press the AMP button again on the remote, to put the remote back into AMP mode - otherwise it thinks you want it in the mode for whichever input you have selected - so for example it's trying to display the menu for the BD player as opposed to the AMP.
If you're having so many problems then take it back and get it swapped, or test it again in the shop.