|
For anyone that is concerned about bonding the masking fabric to the back of the screen you can add a false back to the screen...
Lower you screen to maximum.
Bond a sheet of thin fabric, a little smaller than your screen width, to the back of your screen at the very top. This should be outside of the viewing area.
Allow the fabric to settle overnight.
Raise the screen almost all the way up.
Bond the bottom of the fabric to the bottom of your screen, outside the viewing area again.
When you lower the screen this new backing may sag a little but you can attach your mask to this instead of the screen.
Be sure when you do this that as you raise the screen the first time there is sufficient space within the case for the addition thickness created by the false back and mask in the roll.
|