Hello again, I've tried everything and still no result. From the Panasonic Home cinmea BT-100 side I select D-IN (via optical cable) and set the systems as requested to TV Sound. No result. From the Samsung side the Hoem cinema system when scanned for devices momentarly identifies it a PLAYER and then RECEIVER but directly afterwards lists it simply as player. I'm mentioning this as from the Sasmung side I have conflicting suggetsions. the service center guys mention that the D-OUT port is always ON and you don't need to set anything on the TV set and the user guide which at one point mentions that when connecting to a Home Cinema system you may have to go to the Anynet+ (device) list and toggle the RECEIVER function from off to on. the thing is that my devices when scanned is accessed and appears only as player and not as receiver. samsung is now claiming either a) non compatibility between their D-OUT to the Panasonic's D-IN (TV) !!!! or b) damaged optical cable (by the way hooked it up to a Sony DVD player via optical and still no sound thru the Home cinema system!) or (most probably!!!) c) length of the tip of the optical cable too short -> change cable. D-day is Monday as I'm going over to Panasonic for on site test. any suggesitons?
Quote:
Originally Posted by davepuma  What input on the Samsung SC-BT100 are you using? Did you try my suggestions?
I tried downloading the manual (what language was that?) but it timed out. What options are in the TV's audio settings? |