|
Just a quick note re the LFE settings - you must have bass management enabled (this most commonly involves setting your speakers to "small") and the sub channel active on your processor/receiver, otherwise the sub will reproduce the entire frequency spectrum and sound awful. Also, it's a discrete setting so if you "pull it back" a bit - to quote John's informative post - it'll go *click* and give you a crossover frequency of approximately 120Hz.
You might also want to try setting the crossover to the same frequency as the bass management cutoff frequency on your receiver (commonly 75-100Hz), as this has given good results with this particular sub in the past.
MuFu.
|